To use all functions of this page, please activate cookies in your browser.
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
A battery (vacuum tubes)
In electronics, an A battery is any battery used to provide power to the filament of a vacuum tube. It is sometimes colloquially referred to as a "wet battery" (although there's no reason why a "dry" battery of suitable voltage couldn't be utilised for the purpose; the A battery in the photo is a dry battery.) The term comes from the days of valve (tube) radios when it was common practice to use a dry battery for the plate (Anode) voltage and a rechargeable lead/acid "wet" battery for the filament voltage.
The alphabetic designation of these batteries is derived from the historic identification of the elements of the vacuum tube. Initially, the only such device was a diode with only a plate and cathode. Following the direction of electron flow, these electrodes were identified as "A" and "B" for the cathode and anode (plate), respectively. Later, when the control grid element was added to create the triode tube, it was logically assigned the letter "C."
|This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "A_battery_(vacuum_tubes)". A list of authors is available in Wikipedia.|