Monsanto process

The Monsanto process is an important method for the manufacture of acetic acid. This process operates at a pressure of 30-60 atm and a temperature of 150-200 °C and gives a selectivity greater than 99%. The Monsanto process has largely been supplanted by the Cativa process, a similar iridium-based process developed by BP Chemicals Ltd which is more economical and environmentally friendly.

Additional recommended knowledge

Don't let static charges disrupt your weighing accuracy

Weighing the right way

Safe Weighing Range Ensures Accurate Results

Catalytic cycle

The catalytically active species is the anion cis-[[Rh(CO)₂I₂]]^- (1). The catalytic cycle has been shown to involve six steps, two of which do not involve rhodium: conversion of methanol to methyl iodide and the hydrolysis of the acetyl iodide to acetic acid. The first organometallic stepl is the oxidative addition of methyl iodide to cis-[[Rh(CO)₂I₂]]^- to form the hexacoordinate species [[(CH₃)Rh(CO)₂I₃]]^- (2). This anion rapidly transforms, via the migration of a methyl group to the carbonyl ligand, affording the pentacoordinate acetyl complex [[(CH₃CO)Rh(CO)I₃]]^- (3). This five-coordinate complex then reacts with carbon monoxide to form the six coordinate dicarbonyl complex (4) which decomposes by reductive elimination to form the acetic acid iodine compound (CH₃COI) and regenerate the active form of the catalyst. Acetic acid iodine is then hydrolyzed to acetic acid.

The reaction has been shown to be first order with respect to methyl iodide and the catalyst (1). Hence the rate-determining step of the catalytic cycle has been proposed to be the oxidative addition of methyl iodide to the catalyst (1). It is believed that this occurs via the nucleophilic attack by the rhodium centre on the carbon of methyl iodide.

Tennessee Eastman Acetic Anhydride Process

Acetic anhydride is produced by carbonylation of methyl acetate in a process that was inspired by the Monsanto acetic acid synthesis.^[1]

CH₃CO₂CH₃ + CO → (CH₃CO)₂O

In this process methyl acetate converts to methyl iodide, which in turn affords acetyl iodide, which reacts with acetate salts or acetic acid to give the product. Rhodium iodides and lithium salts are employed as catalysts. Because acetic anhydride is not stable in water, the conversion is conducted under anhydrous conditions in contrast to the Monsanto acetic acid synthesis.

References

1. ^ Zoeller, J. R.; Agreda, V. H.; Cook, S. L.; Lafferty, N. L.; Polichnowski, S. W.; Pond, D. M. "Eastman Chemical Company Acetic Anhydride Process" Catalysis Today (1992), volume 13, pp.73-91. doi:10.1016/0920-5861(92)80188-S

• http://www.uyseg.org/catalysis/ethacid/ethacid2.htm
• http://www.uyseg.org/greener_industry/pages/ethanoicAcid/6ethanoicAcidPM2.htm