My watch list
my.chemeurope.com  
Login  

Making carbon nanotubes as usable as common plastics

17-May-2018

Jiaxing Huang Group, Northwestern University

The carbon nanotube-based dough can be transformed into arbitrary shapes, such as a freestanding strip by cold rolling.

Jiaxing Huang Group, Northwestern University

Four continuous states of (a) carbon nanotube powders in cresol-based solvent: (b) a dilute dispersion for casting thin films, (c) a thick paste for blading coating, painting, screen printing or composite making, (d) a self-standing gel for 3D printing, and finally (e) a kneadable dough that can be readily transformed into various shapes.

Jiaxing Huang Group, Northwestern University

The carbon nanotube-based dough can be transformed into arbitrary shapes defined by a mold.

Northwestern University's Jiaxing Huang is ready to reignite carbon nanotube research. And he's doing so with a common chemical that was once used in household cleaners.

By using an inexpensive, already mass produced, simple solvent called cresol, Huang has discovered a way to make disperse carbon nanotubes at unprecedentedly high concentrations without the need for additives or harsh chemical reactions to modify the nanotubes. In a surprising twist, Huang also found that as the nanotubes' concentrations increase, the material transitions from a dilute dispersion to a thick paste, then a free-standing gel and finally a kneadable dough that can be shaped and molded.

"Because of their exceptional mechanical, thermal and electrical properties, carbon nanotubes have attracted a lot of attention for a number of applications," said Huang, professor of materials science and engineering in Northwestern's McCormick School of Engineering. "But after decades of research and development, some of the excitement has faded."

The reason? Carbon nanotubes are notoriously tricky to process -- especially in large quantities. About 10,000 times thinner than a human hair, the wiry, tube-shaped structures are said to be stronger than steel and conduct heat and electricity far better than copper. But when mass produced -- usually in the form of powders -- the tubes twist and clump together. This complication is a major barrier to the material's widespread applications.

"Aggregated tubes are hard to disperse in solvents," Huang said. "And if you cannot get a good dispersion, then you won't be able to make high-quality nanotube thin films that many applications rely on."

In order to bypass this problem, previous researchers used additives to coat the nanotubes, which chemically altered their surfaces and forced them to separate. Although these methods do work, they leave behind residues or alter the nanotubes' surface structures, which can blunt their desirable properties.

By contrast, Huang's team found that cresol does not deteriorate carbon nanotubes' surface functions. And, after separating the entangled tubes, researchers can simply remove the chemical by washing it off or heating it until it evaporates.

Finding unexpected kneads

After unlocking a new way to make carbon nanotubes in higher and higher concentrations, Huang and his team discovered new forms of the material. As the concentration of carbon nanotubes increases, the material transitions from a dilute dispersion to a spreadable paste to a free-standing gel and finally to a kneadable dough. These various forms can be molded, reshaped or used as conductive ink for 3D printing.

"The dough state of nanotubes is fascinating," said Kevin Chiou, a graduate student in Huang's laboratory and first author of the paper. "It can be readily shaped and molded into arbitrary structures just like playdough."

"Essentially, this solvent system now makes nanotubes behave just like polymers," Huang said. "It is really exciting to see cresol-based solvents make once hard-to-process carbon nanotubes as usable as common plastics."

Original publication:

Kevin Chiou, Segi Byun, Jaemyung Kim, and Jiaxing Huang; "Additive-free carbon nanotube dispersions, pastes, gels, and doughs in cresols"; PNAS; 2018

Facts, background information, dossiers
More about Northwestern University
  • News

    Unprecedented control of polymer grids achieved

    Synthetic polymers are ubiquitous -- nylon, polyester, Teflon and epoxy, to name just a few -- and these polymers are all long, linear structures that tangle into imprecise structures. Chemists have long dreamed of making polymers with two-dimensional, grid-like structures, but this goal ha ... more

    Artificial intelligence accelerates discovery of metallic glass

    If you combine two or three metals together, you will get an alloy that usually looks and acts like a metal, with its atoms arranged in rigid geometric patterns. But once in a while, under just the right conditions, you get something entirely new: a futuristic alloy called metallic glass. T ... more

    Graphene finds new application as non-toxic, anti-static hair dye

    It's an issue that has plagued the beauty industry for more than a century: Dying hair too often can irreparably damage your silky strands. Now a Northwestern University team has used materials science to solve this age-old problem. The team has leveraged super material graphene to develop ... more

  • Videos

    Light-Powered 3-D Printer Prints Stent

    The 3-D printer in Cheng Sun’s lab allows researchers to fabricate materials that precisely fit their designs. It uses a photo-polymer in liquid form that coverts into a solid when light is applied. The material actually forms to the shape of the projected light, creating a 3-D structure. more

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE