After a strong Q3 WACKER expects to post full-year EBITDA of €1 billion
Wacker Chemie AG substantially increased its sales and EBITDA in the third quarter of 2017, both year over year and quarter over quarter. The Munich-based chemical company posted sales of €1,311.6 million in the reporting quarter (Q3 2016: €1,150.8 million). That was 14 percent more than a year ago and 8 percent higher than in Q2 2017 (€1,218.3 million). The main reason for the increase versus Q3 2016 was the fact that overall volumes for silicones, polymer products and polysilicon were markedly higher year over year. As a result, WACKER more than compensated for negative exchange-rate effects from a stronger euro and for prices that were somewhat lower on balance.
WACKER generated EBITDA of €298.0 million in Q3 2017. That was 13 percent higher than last year (€264.0 million) and 18 percent more than a quarter ago (€253.4 million). The increase was prompted mainly by volume-driven sales growth and by income from the equity investment in Siltronic. As a result, WACKER more than compensated for the year-over-year rise in raw-material prices. High plant utilization also strengthened EBITDA in the reporting quarter. The Group’s EBITDA margin from July through September 2017 was 22.7 percent (Q3 2016: 22.9 percent). A quarter ago, it was 20.8 percent. Group earnings before interest and taxes (EBIT) amounted to €155.3 million in Q3 2017 (Q3 2016: €108.1 million). That was a year-over-year increase of 44 percent and yielded an EBIT margin of 11.8 percent (Q3 2016: 9.4 percent). Net income for the reporting quarter amounted to €104.2 million (Q3 2016: €67.5 million) and earnings per share came in at €2.04 (Q3 2016: €1.29).
WACKER has raised its earnings forecast for full-year 2017. EBITDA is now expected to be at €1 billion, exceeding last year’s adjusted figure of €955.5 million. Previously, WACKER anticipated that EBITDA would be between €900 million and €935 million. The reasons for the upgrade are the Group’s strong business performance as well as the income from its stake in Siltronic AG. Group sales are expected, as before, to rise by a mid-single-digit percentage compared with last year’s €4,634.2 million.
“At WACKER, the third quarter was the most successful so far this year,” said Group CEO Rudolf Staudigl in Munich on Thursday. “Demand for silicones and polysilicon was especially strong, with the two divisions posting news volume records. Our robust performance more than compensated for the headwinds from markedly higher raw-material prices and a stronger euro. Given the continued strength of business, we are upgrading our forecast. This means our 2017 earnings will be higher than last year.”
Regions
In Q3 2017, Group sales continued to climb in every region except for the Americas, where sales of €207.0 million were 1 percent lower year over year (Q3 2016: €208.8 million) due to currency-exchange effects. Asia posted the biggest increase, with sales up 29 percent to €536.4 million (Q3 2016: €416.4 million). In Europe, sales of €511.5 million were 7 percent higher year over year (Q3 2016: €476.3 million).
Capital Expenditures and Net Cash Flow
In Q3 2017, the Group’s capital expenditures amounted to €74.9 million (Q3 2016: €76.6 million), a decline of 2 percent. Investments went primarily toward expanding capacity for silicone and polymer products. Net cash flow from continuing operations amounted to €205.3 million in Q3 2017 (Q3 2016: €208.9 million).
Employees
WACKER’s global workforce edged up in the reporting quarter. The Group had 13,798 employees as of September 30, 2017 (June 30, 2017: 13,689). At the end of the reporting quarter, 9,973 employees (June 30, 2017: 9,887) worked at WACKER sites in Germany and 3,825 (June 30, 2017: 3,802) at international locations.
Business Divisions
WACKER SILICONES generated total sales of €559.3 million in Q3 2017 (Q3 2016: €503.1 million), up 11 percent. Volume growth was the main reason for this increase, with better prices also lifting sales somewhat. Compared with a quarter ago (€548.7 million), the division’s sales rose 2 percent. EBITDA at WACKER SILICONES reached €128.0 million in the reporting quarter, 27 percent higher than a year ago. In addition to sales growth, product-mix effects and high production output enhanced profitability. Relative to a quarter ago (€110.8 million), WACKER SILICONES’ EBITDA climbed 16 percent. The EBITDA margin improved to 22.9 percent in Q3 2017, after 20.0 percent in Q3 2016 and 20.2 percent in the preceding quarter.
Sales at WACKER POLYMERS totaled €317.9 million in the reporting quarter, 3 percent higher than a year ago (€308.2 million). Volume growth was the main reason for this increase. Compared with the preceding quarter (€335.3 million), sales declined by 5 percent, in part due to exchange-rate effects. The division’s EBITDA amounted to €57.0 million in Q3 2017 (Q3 2016: €73.2 million). This decline of 22 percent was mainly caused by a substantial year-over-year increase in raw-material prices. The division announced price rises to counter this development. EBITDA contracted by 9 percent versus a quarter ago (€62.4 million), mainly due to lower sales. The reporting-quarter EBITDA margin was 17.9 percent, after 23.8 percent a year earlier and 18.6 percent a quarter ago.
WACKER BIOSOLUTIONS reported total sales of €53.2 million in Q3 2017. That was 2 percent below the year-earlier period (€54.0 million), but 3 percent higher than in the preceding quarter (€51.4 million). The main causes of the slight year-over-year decline were somewhat lower prices in certain product segments and negative exchange-rate effects. The division’s EBITDA came in at €10.3 million in the reporting quarter, down 9 percent from a year ago (€11.3 million), mainly due to lower sales. On the other hand, the division exceeded its EBITDA of a quarter ago (€9.1 million) by 13 percent. The EBITDA margin was 19.4 percent, after 20.9 percent last year and 17.7 percent in Q2 2017.
WACKER POLYSILICON achieved total sales of €341.7 million in the reporting quarter. That was 35 percent more than a year ago (€253.0 million) and 39 percent higher versus the preceding quarter (€246.7 million). The strong rise was mainly due to substantial year-over-year and quarter-over-quarter volume growth, which was supported by sales from inventory. WACKER POLYSILICON’s reporting-quarter EBITDA came in at €85.0 million, compared with €82.3 million last year. That was an increase of 3 percent. Relative to a quarter earlier (€71.3 million), EBITDA grew by 19 percent. From July through September 2017, the division’s EBITDA margin was 24.9 percent, after 32.5 percent in Q3 2016 and 28.9 percent in Q2 2017. Substantially higher sales lifted earnings, while product-mix and inventory effects dampened the EBITDA margin.
Outlook
In Q1 2017, WACKER reduced its stake in Siltronic AG to 30.8 percent. As stipulated by IFRS 5 (Non-Current Assets Held for Sale and Discontinued Operations), WACKER is retrospectively reporting the net income of Siltronic AG and its subsidiaries for 2016 and Q1 2017 as income from discontinued operations. Since March 15, 2017, WACKER’s stake in Siltronic has been accounted for using the equity method.
At the time of publishing its Q1 2017 report and then its Q2 2017 report, the company revised upward its expectations for WACKER SILICONES, given the strong demand for silicone products. WACKER also upgraded its forecast for Group earnings in the Q2 2017 report.
In the present Interim Report, WACKER has once again revised up-ward its earnings forecast for the Group. Full-year EBITDA is anticipated to be at €1 billion, exceeding last year’s adjusted figure of €955.5 million. The reasons for the upgrade are the company’s strong business performance and also the income included in the forecast from WACKER’s stake in Siltronic AG. The full-year EBITDA margin is likely to be on a par with last year’s level. Previously, WACKER expected it to be somewhat lower than a year ago. WACKER has also adjusted or stated more precisely its estimates for investment spending, net cash flow, ROCE and net financial debt.
The full-year 2017 projections for WACKER’s financial performance indicators – based on the adjusted 2016 figures – are as follows:
- Group sales are projected, as before, to rise by a mid-single-digit percentage compared with last year’s €4,634.2 million.
- The EBITDA margin is expected to be on a par with last year (20.6 percent).
- Full-year EBITDA is anticipated to be at €1 billion.
- ROCE will be slightly above last year’s figure of 5.6 percent.
- Net cash flow is expected to be clearly positive in 2017, but somewhat lower than last year (€361.1 million).
- In 2017, capital expenditures will be at the year-earlier level (€338.1 million, without Siltronic).
- As before, depreciation is expecte
Other news from the department business & finance
Get the chemical industry in your inbox
From now on, don't miss a thing: Our newsletter for the chemical industry, analytics, lab technology and process engineering brings you up to date every Tuesday and Thursday. The latest industry news, product highlights and innovations - compact and easy to understand in your inbox. Researched by us so you don't have to.
