my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
NEW Laser Particle Sizer ANALYSETTE 22 NanoTec plus
Measurement design for the nano particle size range
Well-conceived: Practical fast-switch-system for changing between the different dispersion units
With a total measuring range of 0.01 – 2000 μm in a single instrument, the Laser Particle Sizer ANALYSETTE 22 NanoTec plus is the ideal, universally applicable Laser Particle Sizer for the effective and reliable determination of particle size distributions in production and quality control as well as in research and development. Innovative FRITSCH laser technology makes it possible to separately select 5 different measuring ranges. For elegant measurements with maximum flexibility, highest resolution, outstanding sensitivity - and perfect results down to the nano range.
5 measuring ranges without optical conversion
With your ANALYSETTE 22 NanoTec plus, you can choose between three measurement positions of the measuring cell, allowing measurements in 5 different measuring ranges without modification. Your advantage: optimal adaptation of the particle size measurement to your sample.
Highest measurement precision with all detectors
The elegant FRITSCH measuring solution: Regardless of the measurement position you select, the ANALYSETTE 22 NanoTec plus always uses all 57 measuring channels of the detector. By combining the various measurement positions, it is possible to perform measurements with up to 165 effective channels. Your advantage: a particularly high resolution and sensitivity.
A third laser for measuring nano-particles
To extend the particle size determination down to the nano range, it is necessary to detect the light that scatters backward. And the FRITSCH solution for this is simply brilliant: a third laser beam utilises backward scattering for the measurement. This beam irradiates the sample positioned directly in front of the detector through a micro-hole in the centre of the detector. Your advantage: the uniquely large measuring range of the ANALYSETTE 22 NanoTec plus with a lower measuring limit of approximately 0.01 μm. And instead of a weak diode a real intensive laser for backward scattering.
Dispersion – Perfectly conceived dispersion units
Basically, any particle size measurement is only as good as its dispersion. For this reason, we have developed the ANALYSETTE 22 NanoTec plus as an especially practical modular system with perfectly conceived units for dry and wet dispersion. When switching between wet and dry measurement, the measuring cell, which is located in a practical cartridge, can be easily exchanged – without changing any hoses or modifying the instrument! The cartridge you are not using now, can be easily stored within the dispersion unit. Your advantage: Perfectly neat and tidy!
Your advantages with the ANALYSETTE 22 NanoTec plus:
Test the FRITSCH Laser Particle Sizers!
Send us your sample for a free of charge sample measurement – we will send you a detailed analysis protocol. Compare for yourself!
Request further information material about the FRITSCH Laser Technology now!
Contact / Request information
Contact the supplier and request further information free of charge:
Watchlist
This is where you can add this product to your personal favourites
Additional Information
analytica 2012
04-17-2012 - 04-20-2012
Hall B2, Booth 303
NEW: Laser Particle Sizer ANALYSETTE 22 NanoTec plus
With a total measuring range of 0.01 – 2000 μm, fully automatic dry and wet measurement, analysis and cleaning, consistent reproducibility, high more
NEW: Cyclone for Centrifugal Mill – the all-purpose mill for rapid size reduction
Improved air routing, secure protection against clogging of the sieve ring, increased throughput – the ideal solution for heat-sensitive or samples more
FRITSCH Planetary Ball Mills – High-performance all-rounders in routine laboratory work!
For wet and dry comminution of a few milligrams up to several kilograms down to fineness levels below 1 µm – absolutely reliable, especially easy to operate and clean more
Fritsch as Authorized Economic Operator (AEO-F) certified
A seal of quality identifies the FRITSCH GmbH • Milling and Sizing since the end of October 2008, as a “safe partner in trade” towards custom offices and customers, because the company is certified as an Authorized Economic Operator AEO F. An Authorized Economic Operator possesses a speci ... more
Dedication of the new Fritsch production facility
Construction started in March and already seven months later, the new Fritsch production facility was dedicated. Management, employees, business associates and all involved in the endeavour were present during the formal opening of the building. In the past five years Fritsch increased its ... more
Particle sizing with static laser scattering
When determining particle sizes a wide variety of techniques are used in which sieving may be the most popular. Sieving is a relatively simple technique, despite the fact that of course different instrumental approaches can be used. The main advantages of sieving are the low price of the in ... more
FRITSCH is one of the internationally leading manufacturers of application-oriented laboratory instruments for sample preparation and particle sizing. Here a short view of the FRITSCH instrument ranges: - Mills for crushing, micro-milling, mixing, homogenising of hard-brittle, fibrous, el ... more
About CHEMIE.DE
CHEMIE.DE Information Service GmbH runs specialist scientific internet portals. The secret to our success? We are familiar with what we publish.
Advertising at CHEMIE.DE
Our advertising formats support you in getting your message across to a clearly defined target audience.
© 1997-2011 CHEMIE.DE Information Service GmbH, All rights reserved
