my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
Ideal for fast and loss-free grinding from a few milligrams to several kilograms at a wide range of fineness levels down to less than 1 µm – dry or in suspension – absolutely reliable, easy to operate and to clean!
Perfect for
Geology and Mineralogy, Ceramics, Chemistry, Biology, Pharmaceuticals, Metallurgy, Material Technology and sample preparation for analysis. Worldwide standard for mixing and homogenising of emulsions and pastes or for mechanical alloying and activation in materials research.
Absolutely reliable, especially easy to operate and clean!
Your advantages with FRITSCH Planetary Mills classic line
By the way:
FRITSCH Planetary Mills classic line are available in different configurations – for each application the perfect Mill!
Test the FRITSCH Planetary Mills!
Send us your most difficult sample – we will carry out a free sample grinding for you free of charge. Compare yourself!
For more information on our products and complete FRITSCH service, have a look at our website.
Contact / Request information
Contact the supplier and request further information free of charge:
Watchlist
This is where you can add this product to your personal favourites
Additional Information
NEW: Cyclone for Centrifugal Mill – the all-purpose mill for rapid size reduction
Improved air routing, secure protection against clogging of the sieve ring, increased throughput – the ideal solution for heat-sensitive or samples more
FRITSCH Planetary Ball Mills – High-performance all-rounders in routine laboratory work!
For wet and dry comminution of a few milligrams up to several kilograms down to fineness levels below 1 µm – absolutely reliable, especially easy to operate and clean more
NEW: Laser Particle Sizer ANALYSETTE 22 NanoTec plus
With a total measuring range of 0.01 – 2000 μm, fully automatic dry and wet measurement, analysis and cleaning, consistent reproducibility, high more
Fritsch as Authorized Economic Operator (AEO-F) certified
A seal of quality identifies the FRITSCH GmbH • Milling and Sizing since the end of October 2008, as a “safe partner in trade” towards custom offices and customers, because the company is certified as an Authorized Economic Operator AEO F. An Authorized Economic Operator possesses a speci ... more
Dedication of the new Fritsch production facility
Construction started in March and already seven months later, the new Fritsch production facility was dedicated. Management, employees, business associates and all involved in the endeavour were present during the formal opening of the building. In the past five years Fritsch increased its ... more
Particle sizing with static laser scattering
When determining particle sizes a wide variety of techniques are used in which sieving may be the most popular. Sieving is a relatively simple technique, despite the fact that of course different instrumental approaches can be used. The main advantages of sieving are the low price of the in ... more
FRITSCH is one of the internationally leading manufacturers of application-oriented laboratory instruments for sample preparation and particle sizing. Here a short view of the FRITSCH instrument ranges: - Mills for crushing, micro-milling, mixing, homogenising of hard-brittle, fibrous, el ... more
About CHEMIE.DE
CHEMIE.DE Information Service GmbH runs specialist scientific internet portals. The secret to our success? We are familiar with what we publish.
Advertising at CHEMIE.DE
Our advertising formats support you in getting your message across to a clearly defined target audience.
© 1997-2011 CHEMIE.DE Information Service GmbH, All rights reserved
