My watch list
my.chemeurope.com  
Login  

Preparation of chitosan‐based flocculant for high density waste drilling mud solid–liquid separation

Abstract

High performance flocculant was prepared by chitosan (CS), ethacryloyloxyethyl trimethyl ammonium chloride (DMC), and acrylamide (AM). The optimum preparation conditions were determined by orthogonal test of four factors and three levels. The different factors affecting the flocculating ability of the prepared flocculants for waste drilling mud were studied, and optimal synthesis conditions were established: polymerization temperature was 60, reaction time was 4 h, DMC was 3 mL, w(AM) : w(CS) was 4, and the initiator was 0.4% of AM (wt %). The prepared CS–AM–DMC copolymer was characterized by Fourier Transform Infrared Spectroscopy (FTIR), scanning electron microscopy (SEM), and gel permeation chromatography (GPC). The results showed that AM, DMC were grafted to CS successfully. The solid–liquid separation properties were also investigated, and the prepared flocculant showed great advantages than commercial products for high density waste drilling mud use. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Authors:   Zhu, Hong; Sun, Haiyun; Wang, Fanghui; Zou, Jing; Fan, Jiantao
Journal:   Journal of Applied Polymer Science
Volume:   125
Issue:   4
Year:   2012
Pages:   2646
DOI:   10.1002/app.36418
Publication date:   15-08-2012

Watchlist

This is where you can add this publication to your personal favourites.

Additional Information

Facts, background information, dossiers
More about Wiley
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE