My watch list
my.chemeurope.com  
Login  

5,790 Newest Publications in journal of applied polymer science

rss

Recent advances in low‐cost carbon fiber manufacture from lignin

27-04-2013 | Darren A. Baker, Timothy G. Rials, Journal of Applied Polymer Science, 2013

ABSTRACT The confluence of two US energy policy mandates, the 2012 Corporate Average Fuel Economy Standards and Renewable Fuels Standard #2, provide the opportunity to examine the possibility of high‐value materials from lignin with increased depth. In this case, the desire to provide ...

more

Characterization of the draping behavior of jute woven fabrics for applications of natural‐fiber/epoxy composites

27-04-2013 | Ahmed El‐Sabbagh, Iman Taha, Journal of Applied Polymer Science, 2013

ABSTRACT In this study, we investigated the draping behavior of jute woven fabric to study the feasibility of using natural fabrics in place of synthetic glass‐fiber fabrics. Draping behavior describes the in‐mold deformation of fabrics, which is vital for the end appearance and ...

more

Electrochemical grafting of 4‐phenoxybenzoic acid units onto oxidized carbon fibers as a first step for high temperature composites

27-04-2013 | Spyridon Soulis, Despina Triantou, Johannis Simitzis, Journal of Applied Polymer Science, 2013

ABSTRACT The electropolymerization of 4‐phenoxybenzoic acid (4‐PBA) onto carbon fibers (CFs) was studied as a way to synthesize coated CFs with grafted poly(para‐phenyl ether ketone) (p‐PEK) and enhance their wettability by matrices such as PEK or PEEK. Since the pristine CFs were not ...

more

Preparation, characterization, and release properties of hydrogels based on hyaluronan for pharmaceutical and biomedical use

27-04-2013 | Ferran Roig‐Roig, Conxita Solans, Jordi Esquena, María José García‐Celma, Journal of Applied Polymer Science, 2013

ABSTRACT Hyaluronic acid (HA) is a natural polysaccharide that is widely distributed in the human body. Its physicochemical properties and high biocompatibility make it a good candidate for biomedical and pharmaceutical uses. In the present work, we report HA‐based hydrogels that could be ...

more

Mechanical and dielectric properties of short‐carbon‐fibers/epoxy‐modified‐organic‐silicone‐resin as heat resistant microwave absorbing coatings

27-04-2013 | Shanshan Huang, Wancheng Zhou, Fa Luo, Dongmei Zhu, Journal of Applied Polymer Science, 2013

ABSTRACT Heat resistant microwave absorbing coatings were prepared by brushing and thereafter heat treatment, using epoxy modified organic silicone resin as binding material, short carbon fibers (Csf) as absorbers, talcum powder and glass powder as filling materials. The mechanical and ...

more

Chemosynthesis and characterization of fully biomass‐based copolymers of ethylene glycol, 2,5‐furandicarboxylic acid, and succinic acid

26-04-2013 | Zuolong Yu, Jiadong Zhou, Fei Cao, Binbin Wen, Xuan Zhu, Ping Wei, Journal of Applied Polymer Science, 2013

ABSTRACT Poly(ethylene 2,5‐furandicarboxylate‐co‐ethylene succinate) (PEFS) copolymers of 2,5‐furandicarboxylic acid (FDCA) and succinic acid with 11.98–91.32 mol % FDCA composition were synthesized via melt polycondensation in the presence of ethylene glycol using tetrabutyl titanate as ...

more

Improvement in mechanical and thermal properties of phenolic foam reinforced with multiwalled carbon nanotubes

26-04-2013 | Zhongjia Yang, Lili Yuan, Yizhuo Gu, Min Li, Zhijie Sun, Zuoguang Zhang, Journal of Applied Polymer Science, 2013

ABSTRACT Phenolic foams reinforced with pristine and functionalized multiwalled carbon nanotubes (MWCNTs) were fabricated to develop fire‐resistant materials with improved mechanical properties. The influences of the contents of carboxyl multi‐walled carbon nanotubes (MWCNTs‐COOH) and of ...

more

A multifunctional luminescent europium photostabilizer based on a novel hindered amine ligand and phenanthroline

26-04-2013 | Jiajie Wu, Jiachun Feng, Journal of Applied Polymer Science, 2013

ABSTRACT A novel hindered amine ligand, mono‐2,2,6,6‐tetramethyl‐4‐piperidyl‐succinate (MTPS), has been designed to chelate europium(III) ion with 1,10‐phenanthroline (Phen) as a coligand to prepare polymer photostabilizer. The luminescent property of the stabilizer and its efficiency of ...

more

Preparation and characterization of high‐performance poly(ether ether ketone) fibers with improved spinnability based on thermotropic liquid crystalline poly(aryl ether ketone) copolymer

26-04-2013 | Jiashuang Luan, Shuling Zhang, Mei Zhang, Zhi Geng, Yang Wang, Guibin Wang, Journal of Applied Polymer Science, 2013

ABSTRACT High‐performance poly(ether ether ketone) (PEEK) fibers were prepared by melt‐spinning in the presence of thermotropic liquid crystalline poly(aryl ether ketone) copolymer (FPAEKLCP). The rheological and mechanical properties, birefringence, orientation, and crystallization of ...

more

Crosslinking behavior of polyarylene ether nitrile terminated with phthalonitrile (PEN‐t‐Ph)/1,3,5‐Tri‐(3,4‐dicyanophenoxy) benzene (TPh) system and its enhanced thermal stability

25-04-2013 | Lifen Tong, Zejun Pu, Xu Huang, Zhiran Chen, Xulin Yang, Xiaobo Liu, Journal of Applied Polymer Science, 2013

ABSTRACT A novel polyarylene ether nitrile terminated with phthalonitrile (PEN‐t‐Ph) was synthesized by a simple solution polycondensation of biphenyl and hydroquinone with 2,6‐dichlorobenzonitrile, followed by termination with 4‐nitrophthalonitrile. The ...

more

Page 1 From 579
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE