To use all functions of this page, please activate cookies in your browser.
My watch list
my.chemeurope.com
my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
724 Newest Publications in korean journal of chemical engineering
rss
Upgrading of biofuel by the catalytic deoxygenation of biomass
27-11-2012 | Chang Hyun Ko, Sung Hoon Park, Jong-Ki Jeon, Dong Jin Suh, Kwang-Eun Jeong, Young-Kwon Park, Korean Journal of Chemical Engineering, 2012
Biomass can be used to produce biofuels, such as bio-oil and bio-diesel, by a range of methods. Biofuels, however, have a high oxygen content, which deteriorates the biofuel quality. Therefore, the upgrading of biofuels via catalytic deoxygenation is necessary. This paper reviews the recent ...
Effect of agglomeration of silver nanoparticle on nanotoxicity depression
27-11-2012 | Eunjoo Bae, Byung-Cheun Lee, Younghun Kim, Kyunghee Choi, Jongheop Yi, Korean Journal of Chemical Engineering, 2012
Silver nanoparticles (AgNPs) are used commercially in a variety of applications, including textiles, cosmetics, spray cleaning agents, and metal products. AgNP itself, however, is classified as an environmental hazard by Environmental Protection Agency (EPA, USA) Nanotechnology White Paper, ...
Synthesis and characterization of waterborne polyurethane acrylate copolymers
27-11-2012 | Misbah Sultan, Haq Nawaz Bhatti, Mohammad Zuber, Mehdi Barikani, Korean Journal of Chemical Engineering, 2012
Polyurethane acrylate copolymers were synthesized by emulsion polymerization process. To reduce the environmental hazards, organic solvents were replaced by eco-friendly aqueous system. Concentration of polyurethane and acrylate monomer was varied to investigate the effect of chemical ...
Physicochemical characterization and dissolution enhancement of loratadine by solid dispersion technique
27-11-2012 | Suresh Bandari, Subash Jadav, Basanth Babu Eedara, Raju Jukanti, Prabhakar Reddy Veerareddy, Korean Journal of Chemical Engineering, 2012
The purpose of this investigation was to enhance the dissolution rate of loratadine using polyethylene glycol 6000 (PEG) solid dispersions (SDs). The solubility behavior of loratadine in the presence of polyethylene glycol 4000 and polyethylene glycol 6000 in water showed linear increase with ...
Application of a novel cationic starch in enhanced oil recovery and its adsorption properties
27-11-2012 | Jianong Fu, Ru Qiao, Lanlan Zhu, Weiqun Zhu, Shiyou Hao, Korean Journal of Chemical Engineering, 2012
We report a preparation of water-soluble cationic starch and its application as an oil-displacing agent in chemical enhanced oil recovery. The singular sand-pack core-flood tests provide experimental evidence that the injection of the modified starch after the conventional water flooding can ...
Inhibition effect of CO2 on asphaltene precipitation for an Iranian crude oil and comparison with N2 and CH4
27-11-2012 | Mohsen Mohammadi, Mahdi Akbari, Alireza Bahramian, Mahdi Sadeghi Naeeni, Zahra Fakhroueian, Korean Journal of Chemical Engineering, 2012
The effects of N2, CH4 and CO2 injection on asphaltene precipitation have been experimentally investigated using a reservoir oil fluid from south of Iran, making use of light transmission method. The results are compared and the effects of injected gases on reducing asphaltene colloidal ...
Photo-responsive microgels composed of polymeric β-cyclodextrin and Tween 20-coumarin conjugate
27-11-2012 | Jing Dai, Seung Ree Seo, Jin-Chul Kim, Korean Journal of Chemical Engineering, 2012
Photo-responsive microgels were prepared by taking advantage of the interaction between Tween 20-coumarin conjugate (TCC) and polymeric β-cyclodextrin (PβCD). TCC was prepared by covalently attaching coumarin to the hydroxyl group of the head (PEO segment) of Tween 20. The molar ratio of ...
Substitution effect of silica by silane-modified titania on the tensile and dynamic properties of silica-filled SBR compounds
27-11-2012 | Young Woo Lim, Jong-Ho Kim, Gon Seo, Korean Journal of Chemical Engineering, 2012
Titania prepared by the calcination of sludge from waste water coagulated by titanium chloride was used as a substituent of the reinforcing material for silica-filled SBR compounds. The titania, mainly composed of anatase, was loosely aggregated and treated with various alkoxy silanes. The ...
Removal characteristics and distribution of indoor tobacco smoke particles using a room air cleaner
26-11-2012 | Sunghak Jung, Youngchull Ahn, Yoochul Lee, Jaekeun Lee, Korean Journal of Chemical Engineering, 2012
The objective of this study is to analyze the removal characteristics and distribution of indoor air pollutants by a room air cleaner. A pollutant removal effect according to room volume and measurement point was evaluated in an indoor room. A series of filtration efficiency tests were ...
A new flow path design for multidimensional protein identification technology using nano-liquid chromatography electrospray ionization mass spectrometry
26-11-2012 | Thangamani Rajesh, Hyung-Yeon Park, Eunjung Song, Changmin Sung, Sung-Hee Park, Jae-Hun Lee, Dongwon Yoo, Yun-Gon Ki ..., Korean Journal of Chemical Engineering, 2012
Multidimensional protein identification technology (MudPIT) is one of the most versatile methods for separating and identifying highly complex peptides or proteins. However, there are still inherent problems resulting from salt in eluent systems and instrumentation with MudPIT. We designed a ...
Netmeeting
