To use all functions of this page, please activate cookies in your browser.
my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
114 Newest Publications in tribotest
rss18-04-2013 | Gaiqing Zhao, Qin Zhao, Weimin Li, Xiaobo Wang, Weimin Liu, Tribotest, 2013
ABSTRACT Nano‐calcium borate (NCB) with an average particle size of about 70 nm was synthesised via ethanol supercritical fluid drying technique, and the morphology and microstructures of as‐prepared particles were characterised by means of scanning electron microscope (SEM, JEOL LTD., ...
12-04-2013 | Liviu E. Mirci, Alina Pătrut, Tribotest, 2013
ABSTRACT The paper presents results concerning the synthesis and characterisation as lubricants with biodegradability potential of some complex tetraesters realised on the basis of adipic acid and different glycols such as (mono) ethylene, 1,3‐propylene, 1,4‐butylene, 1,5‐pentamethylene, ...
03-04-2013 | Bhawna Khemchandani, A.K. Jaiswal, E. Sayanna, Maria Forsyth, Tribotest, 2013
ABSTRACT Biodegradable industrial lubricant applications are gaining popularity with growing environmental concern and stringent government regulations. Plant oils are major base stocks for eco‐friendly green lubricants. However, because of their poor oxidation stability, their ...
20-03-2013 | Ilya I. Kudish, Tribotest, 2013
ABSTRACT The paper is devoted to the application of the early developed asymptotic approach to solution of the steady isothermal problem of elastohydrodynamic lubrication (EHL) for heavily loaded point contacts with skewed direction of entrained lubricant. It is shown that the whole ...
19-02-2013 | Matthew Appleby, Fred K. Choy, Li Du, Jiang Zhe, Tribotest, 2013
ABSTRACT This paper aims at the development of a comprehensive procedure for detecting oil debris contents, as well as analysing other physical parameters associated with lubricating oil degradation, using a combination of ultrasonic, capacitance and inductance‐based measurements. Brief ...
18-02-2013 | David E. P. Gonçalves, Carlos M. C. G. Fernandes, Ramiro C. Martins, Jorge H. O. Seabra, Tribotest, 2013
ABSTRACT In this study, four different fully formulated ISO VG 320 wind turbine gear oils were select: a mineral oil‐based, a polyalphaolefin‐based, an ester‐based and a polyalkyleneglycol‐based fluids. Their physical properties (viscosity, thermoviscosity, piezoviscosity etc.) were ...
15-02-2013 | Koji Takiwatari, Hidetaka Nanao, Shigeyuki Mori, Tribotest, 2013
ABSTRACT In this work, we have investigated the infrared spectra of polar lubricant in order to explore the molecular interaction under high pressure and temperature conditions using diamond anvil cell. Polypropylene glycol and oleic acid were used as base oil and additive, respectively. ...
15-02-2013 | Vladimir Totolin, Marcello Conte, Edurne Berriozábal, Francesco Pagano, Ichiro Minami, Nicole Dörr, Josef Brenner, A ..., Tribotest, 2013
ABSTRACT A tribological investigation of two ionic liquids (ILs) that could be used as potential lubricants for vacuum or space applications is presented. Their tribological behaviour was evaluated using a ball‐on‐flat oscillating reciprocating motion CaTri ultra‐high vacuum (UHV) ...
29-01-2013 | Dan Qiao, Haizhong Wang, Dapeng Feng, Tribotest, 2013
ABSTRACT Four novel benzimidazolyl phosphates (BPs) were synthesized and evaluated as anti‐wear additives in poly(ethylene glycol) for steel/steel contacts. The friction experiments were carried out on an Optimol SRV‐I oscillating reciprocating friction and wear tester (SRV) both at room ...
28-01-2013 | Ilya I. Kudish, Tribotest, 2013
ABSTRACT The paper is devoted to the development of an asymptotic approach to solution of the steady isothermal problem of elastohydrodynamic lubrication (EHL) for heavily loaded point contacts. It is shown that the whole contact region can be subdivided into three subregions: the central ...
