My watch list
my.chemeurope.com  
Login  

Cyclic Olefin Copolymer



Cyclic Olefin Copolymer
Other names Ethylene Copolymer; COC;
Cyclo Olefinecopolymer;
Cyclic Olefin Polymer;
Ethylene-norbornene Copolymer
Identifiers
CAS number 26007-43-2
Properties
Appearance Clear Resin
Density 1.02 g/cm³, solid
Hazards
MSDS COC MSDS
Except where noted otherwise, data are given for
materials in their standard state
(at 25 °C, 100 kPa)

Infobox disclaimer and references

Cyclic Olefin Copolymer (COC) is an amorphous polymer made by several polymer manufacturers. COC is a relatively new class of polymers when compared to polypropylene and polyethylene. This material is primarily used in applications requiring glass-like clarity including lenses, vials, monitors, and medical devices.

Contents

Chemical and physical properties

COC has a transparency similar to glass in its natural form. Typical COC material will have a higher modulus than HDPE and PP. Due to its chemistry, the higher the modulus, the more brittle it becomes. COC also has a high moisture barrier for a clear polymer along with a low absorption rate. In medical applications, COC is noted to be a high purity product with low extractables. COC is also a halogen-free product.

Some properties will vary due to monomer content. These include glass transition temperature, viscosity, and stiffness. The glass transition temperature of these polymers can exceed 150 °C.[1]

Applications

Extrusion

COC can be extruded with both cast and blown film equipment. These films are then used in consumer applications including food and pharmaceutical packaging. Commercial structures of COC used in blister packs are typically coextruded with a thick COC core and thin polypropylene skin layers. PVC and PvDC can also be placed on the skins via lamination.[2] Profile extrusion is another method that can be used to make COC reinforced tubes or pipes.

Molding

While there are many different types of molding, COC is primarily used in injection molding. Its natural clarity makes it useful in lenses for cameras, projectors and copiers. COC has little to no extractables which make it useful in diagnostic and medical devices. Most COC grades can also undergo sterilization by gamma radiation, steam and ethylene oxide.

Fiber Spinning

COC has unique electrical properties that resist dielectric breakdown and have a very low dielectric loss over time. Because of this COC is used in filter media that require a charge retention to work properly.[3]

References

  1. ^ IUPAC Technical Report
  2. ^ Beer, Ekkehard, Drost, Stephen, Frayer, Becky & Kurt Trombley (June 2004), "The Benefits of Cyclic Olefin Copolymer" Pharmaceutical and Medical Packaging News
  3. ^ Lamonte, Ronald & Donal McNally (June 2000), "Uses and Processing of Cyclic Olefin Copolymers" Plastics Engineering
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Cyclic_Olefin_Copolymer". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE