My watch list
my.chemeurope.com  
Login  

Materials, Vol. 11, Pages 1103: The Effect of Zn Content on the Mechanical Properties of Mg-4Nd-xZn Alloys (x = 0, 3, 5 and 8 wt.%)

Materials, Vol. 11, Pages 1103: The Effect of Zn Content on the Mechanical Properties of Mg-4Nd-xZn Alloys (x = 0, 3, 5 and 8 wt.%)

Materials doi: 10.3390/ma11071103

Authors: Serge Gavras Ricardo H. Buzolin Tungky Subroto Andreas Stark Domonkos Tolnai

The mechanical properties of as-cast Mg-4Nd-xZn (x = 0, 3, 5 or 8 wt.%) alloys were investigated both in situ and ex situ in as-cast and solution-treated conditions. The additions of 3 or 5 wt.% Zn in the base Mg-4Nd alloy did not improve yield strength in comparison to the binary Mg-4Nd alloy. Mechanical properties were shown to improve only with the relatively high concentration of 8 wt.% Zn to Mg-4Nd. The change in intermetallic morphology from a continuous intermetallic to a lamella-like intermetallic was the primary reason for the decreased mechanical properties in Mg-4Nd-3Zn and Mg-4Nd-5Zn compared with Mg-4Nd and Mg-4Nd-8Zn. The dissolution of intermetallic at grain boundaries following heat treatment further indicated the importance of grain boundary reinforcement as shown in both in situ and ex situ compression testing. Azimuthal angle-time plots indicated little grain rotation most noticeably in Mg-4Nd, which also indicated the influence of a strong intermetallic network along the grain boundaries.

Authors:   Gavras, Serge ; Buzolin, Ricardo H.; Subroto, Tungky ; Stark, Andreas ; Tolnai, Domonkos
Journal:   Materials
Volume:   11
edition:   7
Year:   2018
Pages:   1103
DOI:   10.3390/ma11071103
Publication date:   28-Jun-2018
Facts, background information, dossiers
  • compression
  • additions
More about Molecular Diversity Preservation International
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE