My watch list
my.chemeurope.com  
Login  

484 Newest Publications of Maney Publishing

rss

You can refine your search further. Select from the filter options on the left to narrow down your results.

Application of electrochemical techniques to organic coatings (AETOC 2013)

19-Dec-2013 | Mills D. J., Corrosion Engineering, Science and Technology, 2013

AETOC 2011 took place in Emmetten, Switzerland on the 24–27, April 2013. This was the latest in a sequence of biannual meetings which have taken place since 1999. The meeting falls under the auspices of the European Federation of Corrosion Coatings Working Party and was the ninth international ...

more

Failure of aluminium metal spray/organic duplex coating systems on structural steel

19-Dec-2013 | Sumon T. A.; Lyon S. B.; Scantlebury J. D., Corrosion Engineering, Science and Technology, 2013

Individually, aluminium metal spray (AMS) and organic paints are well established as effective protective coatings for steel substrates. These coatings are also frequently used together as duplex systems where their combination should produce a synergistic effect. However in certain, mainly ...

more

Corrosion resistance properties of hybrid organic‐inorganic epoxy‐amino functionalised polysiloxane based coatings on mild steel in 3·5%NaCl solution

19-Dec-2013 | Suleiman R.; Mizanurrahman M.; Alfaifi N.; El Ali B.; Akid R., Corrosion Engineering, Science and Technology, 2013

New hybrid organic–inorganic coatings have been developed by reacting a mixture of 3-glycidoxypropyltrimethoxysilane (GPTMS) and tetraorthosilicate (TEOS) with 2–4% aminoethylaminopropyl-methylsiloxane dimethylsiloxane (APDMS) copolymer as a modifier. The sol–gel polymerisation of the inorganic ...

more

Anticorrosive performance of repair painting as remedy for deterioration in metallised steel

19-Dec-2013 | Itoh Y.; Hirohata M.; Hosoi A.2; Sugiura Y.3, Corrosion Engineering, Science and Technology, 2013

When the various metallic coating systems applied on steel bridges deteriorated, they may need to be repaired by painting because onsite metallic recoating is very difficult. In order to examine the performance of repaired painting on steel plates with the remains of four types of deteriorated ...

more

XXII International Materials Research Congress (IMRC) 2013

19-Dec-2013 | Schorr Michael, Corrosion Engineering, Science and Technology, 2013

The XXII International Materials Research Congress (IMRC) 2013 was held during August in one of the most pleasant and beautiful places of Mexico, situated in the tropical, luxurious Yucatan Peninsula. It was jointly promoted and organised by the Sociedad Mexicana de Materiales (MRS-Mexico) and ...

more

Properties of FA-CVD silica coated steel sheet after deformation: coating integrity and corrosion related forming limit curve

19-Dec-2013 | Hausbrand R.; van der Donck T.; Celis J.-P.; Clarysse F., Corrosion Engineering, Science and Technology, 2013

Thin silica coatings may be used as pretreatments for steel sheet, offering temporary corrosion protection and promoting adhesion of organic coatings. For use as ready to paint product, silica coated steel has to possess also good corrosion properties after deformation and successive paint ...

more

Accelerated low water corrosion of steel piling in harbours

19-Dec-2013 | Melchers R. E.; Jeffrey R. J., Corrosion Engineering, Science and Technology, 2013

Accelerated low water corrosion of steel piling in sea water harbours in the UK, Europe and elsewhere has been shown recently to be the result primarily of water pollution. Elevated levels of dissolved inorganic nitrogen in sea and brackish waters are responsible for microbiologically influenced ...

more

Electrochemical study of epoxy coating containing novel conducting nanocomposite comprising polyaniline‐ZnO nanorods on low carbon steel

19-Dec-2013 | Mostafaei A.; Nasirpouri F., Corrosion Engineering, Science and Technology, 2013

Corrosion properties of an organic coating containing polyaniline–ZnO nanocomposites applied on low carbon steel are investigated. Conductive polymers were prepared by in situ chemical oxidative method of aniline in the presence of ZnO nanorods. The synthesised materials were characterised by ...

more

In Memoriam: David Scantlebury 1943‐2012

19-Dec-2013 | Corrosion Engineering, Science and Technology, 2013

This article is currently available as a free download on ingentaconnect

more

Electrochemical synthesis of novel conductive polymer and corrosion protection properties on aluminium

19-Dec-2013 | Mert B. D.; Yazıcı B.*1 and; Lyon S. B., Corrosion Engineering, Science and Technology, 2013

In this study, the new original copolymer film of pyrrole and 2-amino-4-methyl-pyridine has been electrochemically synthesised on 7075 aluminium alloy. The synthesis was achieved in aqueous oxalic acid containing 1∶1 monomer feed ratio. The characteristics of copolymer film were compared with ...

more

Page 1 From 49
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE