To use all functions of this page, please activate cookies in your browser.
my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
2,514 Newest Publications of Pleiades Publishing
rss![]() |
You can refine your search further. Select from the filter options on the left to narrow down your results. |
19-Nov-2012 | Yu. A. Kuzenkov, S. V. Oleinik, S. A. Karimova, T. G. Pavlovskaya, Protection of Metals and Physical Chemistry of Surfaces, 2012
Formation and protective properties of conversion coatings on 1370 aluminum alloy that were obtained in an IFKhANAL-3 alkaline conversion solution are studied. The subsequent filling of the coatings in an inhibitor solution is shown to produce coatings that are resistant to pitting corrosion in ...
19-Nov-2012 | P. A. Vityaz’, A. I. Komarov, V. I. Komarova, Protection of Metals and Physical Chemistry of Surfaces, 2012
It is shown that carbon nanomaterials (ultradispersed diamond-graphite batch mixture, ultradispersed diamonds) introduced into basic electrolytes cause significant intensification of the process of micro-plasma formation of ceramic coatings on aluminum alloys of different compositions, including ...
19-Nov-2012 | S. M. Reshetnikov, E. V. Kharanzhevskii, M. D. Krivilev, Protection of Metals and Physical Chemistry of Surfaces, 2012
Corrosion-electrochemical behavior of composite layers formed by high-speed laser sintering of nanoscale Fe-Ni powders (3.2 and 10 wt % Ni) is studied with the use of anodic potentiodynamic curves recorded in a borate buffer solution in a neutral environment. Composite layers produced are shown ...
19-Nov-2012 | V. A. Karpov, Yu. L. Kovalchuk, U. V. Kharchenko, I. A. Beleneva, Protection of Metals and Physical Chemistry of Surfaces, 2012
It was showed using the example of carbon and high alloyed steels that microfouling that develops on the surface of metals possesses high corrosion activity and stimulates corrosion processes. Local corrosion of high alloyed steels can be activated by the vital activity of anaerobic ...
19-Nov-2012 | A. A. Bolotov, Yu. A. Shvein, A. B. Arabei, A. I. Marshakov, Protection of Metals and Physical Chemistry of Surfaces, 2012
Free-corrosion potentials are measured and potentiodynamic and potentiostatic anodic polarization curves are recorded on an electrode made of pipe steel in soils close to different sections of the Urengoi-Surgut-Chelyabinsk main gas pipeline. The data obtained are compared to the type of ...
19-Nov-2012 | V. P. Grigor’ev, S. P. Shpan’ko, E. V. Plekhanova, A. S. Burlov, V. A. Anisimova, Protection of Metals and Physical Chemistry of Surfaces, 2012
Residual inhibition coefficients K t of acidic corrosion by a mixture of an organic inhibitor and an anionic additive for Al, Zn, Fe, and Ni decrease linearly in time; the duration of the residual protective effect depends linearly on the logarithm of the anionic additive concentration in the ...
19-Nov-2012 | A. E. Gorodetskiy, R. K. Zalavutdinov, V. L. Bukhovets, A. P. Zakharov, Protection of Metals and Physical Chemistry of Surfaces, 2012
Glow discharge in oxygen-containing gases (air, a mixture of O2/N2, N2O) was used for selective removal of amorphous hydrocarbon (a-C:H) films predeposited on stainless steel, W, and Mo. The gasification rate of films was maximal in N2O. H2, H2O, CO, and CO2 were plasmolysis products. Thin (3–30 ...
19-Nov-2012 | F. I. Il’darkhanova, G. A. Mironova, K. G. Bogoslovsky, V. V. Men’shikov, E. D. Bykov, Protection of Metals and Physical Chemistry of Surfaces, 2012
Methods of nanostructuring and hydrophobization of paint coating surface are studied. It is found that the volume modification of the paint with carbon nanotubes and nanofibers affords nanostructuring of the paint coating surface layer. Additional volume hydrophobization with fluorosilane ...
19-Nov-2012 | V. A. Kachanov, V. M. Dolinskii, E. K. Gvozdikova, T. E. Shepil’, V. Yu. Kozin, Protection of Metals and Physical Chemistry of Surfaces, 2012
Results of corrosion tests of structural materials are considered under conditions of ethyl benzene and styrene synthesis, which allowed developing and implementing high-performance home equipment. Causes are studied for enhanced wear of pipes in thermal cracking furnaces, and corresponding ...
19-Nov-2012 | M. O. Agafonkina, Yu. I. Kuznetsov, N. P. Andreeva, Yu. E. Pronin, L. P. Kazanskii, Protection of Metals and Physical Chemistry of Surfaces, 2012
It is shown that introduction of R = Cl substituent into benzotriazole (BTA) structure imparts elevated acidity and hydrophobicity to the molecule and improves the compound’s protective and adsorption properties for low-carbon steel in aqueous solution. The surface layer composition of ...