My watch list
my.chemeurope.com  
Login  

52 Newest Publications about the topic aramid fibers

rss

You can refine your search further. Select from the filter options on the left to narrow down your results.

Effect of treated coir fiber/coconut shell powder and aramid fiber on mechanical properties of vinyl ester

30-Aug-2017 | P.A. Udaya Kumar, Ramalingaiah, B. Suresha, N. Rajini, K.G. Satyanarayana, Polymer Composites, 2017

The surfaces of coir fiber (CF) and coconut shell powder (CSP) were modified by alkali and silane treatment respectively to investigate the consequent effects on reinforcement of vinyl ester (VE) composites. Mono‐composites of VE with surface treated CFs and CSP as well as their hybrid ...

more

Epoxy nanocomposites as matrices for aramid fiber‐reinforced plastics

28-Jul-2017 | Sergey O. Ilyin, Tatiana V. Brantseva, Sergey V. Kotomin, Sergey V. Antonov, Polymer Composites, 2017

Rheological and mechanical properties of nanofilled epoxy resin were studied, including adhesion to aramid fibers and strength of impregnated aramid strands. Light scattering and rheological measurements data imply that nanodiamonds (NDs) and multiwall carbon nanotubes form stable nanosized ...

more

Improving adhesion between aramid fibers and natural rubber through morphological and synthetic modification of the fibers

27-Jul-2017 | Nihal Kanbargi, Alan J. Lesser, Journal of Applied Polymer Science, 2017

ABSTRACT In this article, we present new methods to improve the adhesion between poly(paraphenylene terephthalamide) fibers and a natural rubber for tire reinforcement. Fiber pretreatments are applied to create new surface morphologies on the fiber that enables enhanced adhesion between the ...

more

Properties of fiber reinforced plastics under static and dynamic loading conditions

16-May-2017 | Natalia Korneeva, Vladimir Kudinov, Igor Krylov, Vladimir Mamonov, Polymer Engineering and Science, 2017

The properties and failure mechanisms of anisotropic polymer composite materials in configuration of a single bundle of filaments microcomposite reinforced with carbon and aramid fibers under impact and static loading conditions are investigated by impact break method. Various failure mechanisms ...

more

Mechanical properties of aramid fiber and carbon black filled hydrogenated nitrile rubber for packer compounds

16-May-2017 | Xiaozhen He, Xinyan Shi, Martin Hoch, Christoph Gögelein, Polymer Composites, 2017

For the use in packer elements for oil exploration, rubber materials are required that can withstand high mechanical loads, high temperatures, and aggressive chemical media. To fulfill these demands, we designed composites of hydrogenated acrylonitrile butadiene rubber filled with both carbon ...

more

Effects of surface‐dissolution process multivariables on the morphology, mechanical properties, and crystallization of all‐aramid composites

17-Mar-2017 | Jian Min Zhang, Zeinab Mousavi, Nattkan Soykeabkaew, Ton Peijs, Polymer Composites, 2017

A new type of self‐reinforced composite based on high‐performance aramid fibers was developed to produce an “all‐aramid” composite by applying a surface‐dissolution method to fuse poly(p‐phenyleneterephthalamide) (PPTA) fibers together. After immersion in concentrated (95%) sulphuric acid ...

more

Surface ammonification of the mutual irradiated aramid fibers in 1,4‐dichlorobutane for improving interfacial properties with epoxy resin

11-Feb-2017 | Fei Xie, Lixin Xing, Li Liu, Yuguang Liu, Zhengxiang Zhong, Chuyuan Jia, Wei Wang, Caifeng Wang, Min Zhao, Yudong Huang, Journal of Applied Polymer Science, 2017

ABSTRACT The mutual irradiated aramid fibers in 1,4‐dichlorobutane was ammoniated by ammonia/alcohol solution, in an attempt to improve the interfacial properties between aramid fibers and epoxy matrix. Scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), dynamic contact ...

more

Synthesis and characterization of novel semiaromatic copolyamides bearing both polar hydroxyl and unsaturated allyl substituents

31-Oct-2016 | Wenbin Wang, Xiang Qi, Fei Zhang, Yingdan Zhu, Xinhua Wan, Journal of Polymer Science Part A: Polymer Chemistry, 2016

ABSTRACT A series of novel semiaromatic (co)polyamides, poly(octylene terephthalamide)‐ran‐poly[octylene 2,5‐bis(allyloxy)terephthalamide] (APA8T‐x, x represents the molar fraction of allyloxy containing structure unit), were prepared via the interfacial polymerization of 1,8‐diaminooctane, ...

more

Hybridization effects on tensile and bending behavior of aramid/basalt fiber reinforced epoxy composites

14-Jul-2015 | Ömer Yavuz Bozkurt, Polymer Composites, 2015

In this study, the mechanical properties of aramid/basalt hybrid composite laminates were determined, and the effects of hybridization on the mechanical properties were investigated. To examine the effect of hybridization, the mechanical properties of aramid/basalt hybrid composite laminates ...

more

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

12-Jun-2015 | Judith Wollbrett‐Blitz, Sébastien Joannès, Rémi Bruant, Christophe Le Clerc, Marc Romero De La Osa, Anthony Bunsell, ..., Journal of Polymer Science Part B: Polymer Physics, 2015

ABSTRACT The transverse and longitudinal mechanical properties of aramid fibers like Kevlar™ 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. ...

more

Page 1 From 6
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE