My watch list
my.chemeurope.com  
Login  

52 Newest Publications about the topic aramid fibers

rss

You can refine your search further. Select from the filter options on the left to narrow down your results.

Hybridization effects on lateral buckling behavior of laminated composite beams

29-Apr-2015 | Eyüp Yeter, Ahmet Erkliğ, Mehmet Bulut, Polymer Composites, 2015

The aim of this study is to investigate the influence of hybridization on lateral buckling behavior of composite beams consists of symmetrical and unsymmetrical ply orientations, various cutout shapes, and length/thickness ratio. Carbon, S‐glass, and Aramid fibers are used as reinforcement with ...

more

Crosslinked Aromatic Polyamides: A Further Step in High‐Performance Materials

29-Jul-2013 | Miriam Trigo‐López, José L. Barrio‐Manso, Felipe Serna, Félix C. García, José M. García, Macromolecular Chemistry and Physics, 2013

This work aims to improve the outstanding thermal and mechanical properties of commercialized wholly aromatic polyamide fibers (i.e., aramids), by crosslinking the materials. The introduction of a reactive azide group into the polymer structure leads to functional aramids. Crosslinking processes ...

more

Energy Storage on Ultrahigh Surface Area Activated Carbon Fibers Derived from PMIA

10-Jul-2013 | Alberto Castro‐Muñiz, Fabián Suárez‐García, Amelia Martínez‐Alonso, Juan M. D. Tascón, Takashi Kyotani, ChemSusChem, 2013

Abstract High‐performance carbon materials for energy storage applications have been obtained by using poly(m‐phenylene isophthalamide), PMIA, as a precursor through the chemical activation of the carbonized aramid fiber by using KOH. The yield of the process of activation was remarkably high ...

more

Relationship between performance and microvoids of aramid fibers revealed by two‐dimensional small‐angle X‐ray scattering

24-Jun-2013 | Caizhen Zhu, Xiaofang Liu, Jing Guo, Ning Zhao, Changsheng Li, Jie Wang, Jianhong Liu, Jian Xu, Journal of Applied Crystallography, 2013

Although the crystal structure in aramid fibers and the relationship between the size and orientation of crystallites and the performance of a material have been explored in detail, the effect of microvoids in an aramid fiber on its performance is still not clear. However, it is known that the ...

more

Maleic anhydride‐grafted‐polybutadiene as a controlled defibrillating and dispersing agent for short aramid fiber reinforced thermoplastic polyurethane composite with improved mechanical properties

20-May-2013 | G. S. Shibulal, Kinsuk Naskar, Journal of Applied Polymer Science, 2013

ABSTRACT The reinforcing effect of resorcinol formaldehyde latex (RFL) coated short aramid fiber on an ester‐based thermoplastic polyurethane (TPU) was investigated on the basis of mechanical properties. Short fibers having different fiber length were used for the reinforcement. The ...

more

Influence of processing on morphology in short aramid fiber reinforced elastomer compounds

03-May-2013 | Christian Hintze, Regine Boldt, Sven Wiessner, Gert Heinrich, Journal of Applied Polymer Science, 2013

ABSTRACT The rubber industry is nowadays facing the general increase of raw materials as the customers are confronted with rising prices for energy. Therefore there is a need for higher durability of elastomer applications. Short fiber reinforced elastomers can contribute to the improvement of ...

more

Reactive Aramid Nanostructures as High‐Performance Polymeric Building Blocks for Advanced Composites

20-Nov-2012 | Keqin Cao, Carlos Pons Siepermann, Ming Yang, Anthony M. Waas, Nicholas A. Kotov, M. D. Thouless, Ellen M. Arruda, Advanced Functional Materials, 2012

Abstract Traditionally, the field of advanced nanocomposites has relied on a fairly limited set of building blocks; many with low reactivity and of limited variability. These limitations have been addressed by the creation of functionalized nanometer‐scale aramid structures, in the form of ...

more

Scrutinizing the influence of strain‐induced fiber orientation on the melt rheological behavior of short aramid fiber/thermoplastic elastomer composite using rubber process analyzer

18-Oct-2012 | G. S. Shibulal, K. Naskar, Journal of Applied Polymer Science, 2012

Abstract The effect of fiber loading and its orientational changes on the melt rheological behavior of a short aramid fiber reinforced ethylene‐octene copolymer was explored as function of dynamic strain and frequency using a Rubber Process Analyser (RPA). The rheological responses such as the ...

more

A new electroless Ni plating procedure of iodine-treated aramid fiber

06-Oct-2012 | Ummul Khair Fatema, Yasuo Gotoh, Journal of Coatings Technology and Research, 2012

A new, durable, etchant- and tin-free catalyzation process was studied for electroless nickel metallization of aramid fiber via iodine pretreatment. Firstly, iodine components were selectively doped onto the inner part of the fiber using vapor iodine exposure followed by treatment with a tin-free ...

more

The preparation and adsorption properties of electrospun aramid nanofibers

10-Aug-2012 | Zhimei Wei, Quanchao Zhang, Lihua Wang, Minle Peng, Xiaojun Wang, Shengru long, Jie Yang, Journal of Polymer Science Part B: Polymer Physics, 2012

Abstract The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It ...

more

Page 2 From 6
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE