To use all functions of this page, please activate cookies in your browser.
My watch list
my.chemeurope.com
my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
52 Newest Publications about the topic aramid fibers
rss |
You can refine your search further. Select from the filter options on the left to narrow down your results. |
Dyeing properties and color fastness of 100% meta-aramid fiber
22-Jun-2011 | Fibers and Polymers, 2011
Abstract Dyeing characteristics and fastness of 100 % m-aramid fiber with some commercial dyes were investigated on various dyeing conditions, such as using a swelling agent and electrolyte as auxiliaries. Among commercial dyes used, the basic dyes showed comparatively higher exhaustion yield ...
Sound Transmission Loss Prediction of the Composite Fuselage with Different Methods
15-Apr-2011 | Chongxin Yuan, Otto Bergsma, Adriaan Beukers, Applied Composite Materials, 2011
Increase of sound transmission loss(TL) of the fuselage is vital to build a comfortable cabin environment. In this paper, to find a convenient and accurate means for predicting the fuselage TL, the fuselage is modeled as a composite cylinder, and its TL is predicted with the analytical, the ...
Supercritical fluid‐assisted electroless metal plating onto aramid films: The influence of thermal treatment
15-Feb-2011 | Belmas, Magali; Tabata, Isao; Hisada, Kenji; Hori, Teruo, Journal of Applied Polymer Science, 2011
Abstract Although the production of electro‐conductive aramid fibers is efficient, the method needs to be modified before it can be applied to aramid films. Whereas impregnation of an aramid film with a metal complex using supercritical CO2 is achievable, the relatively low adhesion strength of ...
Synthesis of new aramid fiber
08-Dec-2010 | A. V. Volokhina, V. N. Kiya-Oglu, N. V. Lukasheva, A. N. Sokira, N. V. Pedchenko, I. V. Poleeva, Polymer Science Series A, 2010
A new aramid fiber designed for the fabrication of heat-and-fire-resistant textile products is synthesized. The chemical structure of the initial polymer is a copolymer based on three aromatic diamines—5(6)-amino-2-(p-aminophenyl)benzimidazole, m-phenylenediamine, and p-phenylenediamine—and ...
Surface modification of Aramid fibers with new chemical method for improving interfacial bonding strength with epoxy resin
05-Dec-2010 | Liu, Tie‐Min; Zheng, Yuan‐Suo; Hu, Jie, Journal of Applied Polymer Science, 2010
Friedel‐Crafts reaction was elected as the specific chemical approach to modify Aramid fiber surface in this article. After the surface treatment, the interfacial shear strength value of Aramid fiber/Epoxy composites was enhanced by about 50%. The surface elements of Aramid fibers were determined ...
Fabrication of electrospun meta-aramid nanofibers in different solvent systems
09-Nov-2010 | Lirong Yao, Changhwan Lee, Jooyong Kim, Fibers and Polymers, 2010
Meta-aramid fibers were dissolved in four different solvent systems (DMAc, DMF, NMP, and DMSO) and two kinds of salts (LiCl and CaCl2) were also introduced in this paper. Meta-aramid fibers had a limited solubility in above four solvents, however, fast dissolution could be obtained after adding a ...
Effect of weight ratio of thermoplastic and thermosetting boron‐containing phenolic resin on mechanical, bonding, and ablative properties of thermal insulating composites
05-Oct-2010 | Gao, Guoxin; Zhang, Zhicheng; Li, Xuefei; Meng, Qingjie; Zheng, Yuansuo; Jin, Zhihao, Journal of Applied Polymer Science, 2010
To improve the tensile strength, the bond strength, and the ablation resistant properties as well as the elongation at break of the short aramid fibers reinforced EPDM-based thermal insulation composites, two kinds of boron-containing phenolic resin, thermoplastic (TPBPR) and thermosetting ...
Effects of biomaterials for Lab-on-a-chip production on cell growth and expression of differentiated functions of leukemic cell lines
13-Jul-2010 | Federica Destro, Monica Borgatti, Bruno Iafelice, Riccardo Gavioli, Tanja Braun, Jörg Bauer, Lars Böttcher, Erik Jun ..., Journal of Materials Science: Materials in Medicine, 2010
The rapid increase of the applications for Lab-on-a-chip devices has attracted the interest of researchers and engineers on standard process of the electronics industry for low production costs and large scale development, necessary for disposable applications. The printed circuit board ...
Effect of fiber orientation angle on thermal degradation and ablative properties of short‐fiber reinforced EPDM/NBR rubber composites
01-Jul-2010 | Gao, Guoxin; Zhang, Zhicheng; Zheng, Yuansuo; Jin, Zhihao, Polymer Composites, 2010
A series of short aramid fibers reinforced ethylene- propylene-diene terpolymer (EPDM)/acrylonitrile-butadiene rubber (NBR) composites with designed fiber orientation angle ([beta]) between the short fibers orientation and the ablative surface have been prepared in this work. The influence of ...
Stab-resistant property of the fabrics woven with the aramid/cotton core-spun yarns
25-Jun-2010 | Duong Tu Tien, Jong S. Kim, You Huh, Fibers and Polymers, 2010
Aramid fibers are mainly used for industrial applications and human body protection against ballistic threats. But they are used mostly in forms of composites. And fabrics woven with a high yarn count offer a moderate protection performance against the knife stabbing due to the low shear ...
