To use all functions of this page, please activate cookies in your browser.
My watch list
my.chemeurope.com
my.chemeurope.com
With an accout for my.chemeurope.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
6 Newest Publications about the topic environmental testing
rss |
You can refine your search further. Select from the filter options on the left to narrow down your results. |
Preparation of molecularly imprinted polymeric fibers using a single bifunctional monomer for the solid‐phase microextraction of parabens from environmental solid samples
19-Nov-2015 | Myriam Díaz‐Álvarez, Stephen P. Smith, David A. Spivak, Antonio Martín‐Esteban, Journal of Separation Science, 2015
In this study, molecularly imprinted polymer fibers for solid‐phase microextraction have been prepared with a single bifunctional monomer, N,O‐bismethacryloyl ethanolamine using the so called “one monomer molecularly imprinted polymers” method, replacing the conventional combination of ...
Photoinactivation of various antibiotic resistant strains of Escherichia coli using a paint coat
12-Nov-2012 | Vera M. Sousa, Célia M. Manaia, Adélio Mendes, Olga C. Nunes, Journal of Photochemistry and Photobiology A: Chemistry, 2012
Multi-antibiotic resistant bacteria have been implicated with a large number of hospital-acquired infections and become one of the most significant concerns in public health. Given the potential risk of indoor transmission of these organisms in health care units, the development of a disinfection ...
Affinity and enzyme-based biosensors: recent advances and emerging applications in cell analysis and point-of-care testing
22-Jun-2012 | Ying Liu, Zimple Matharu, Michael C. Howland, Alexander Revzin, Aleksandr L. Simonian, Analytical and Bioanalytical Chemistry, 2012
The applications of biosensors range from environmental testing and biowarfare agent detection to clinical testing and cell analysis. In recent years, biosensors have become increasingly prevalent in clinical testing and point-of-care testing. This is driven in part by the desire to decrease the ...
Electrical Resistance and Microstructural Changes of Silver–Epoxy Isotropic Conductive Adhesive Joints Under High Humidity and Heat
25-Nov-2010 | Sun-Sik Kim, Keun-Soo Kim, KiJu Lee, Seongjun Kim, Katsuaki Suganuma, Hirokazu Tanaka, Journal of Electronic Materials, 2010
In this study, the degradation mechanism of chip resistors mounted with Ag–epoxy isotropic conductive adhesive (ICA) under two different environmental conditions, i.e., humidity exposure (85°C/85% relative humidity) and thermal cycling (TC, –40°C to 125°C), was examined by monitoring the change ...
Process characteristics of pretreatment system under H2S circumstance for bio-gas micro gas turbine power generation
08-Jun-2010 | Kwang-Beom Hur, Sang-Kyu Rhim, Jung-Keuk Park, Jae-Hoon Kim, Korean Journal of Chemical Engineering, 2010
As distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation such as Micro Gas Turbine Power system would be interconnected to the existing grids. This paper describes the results for the mechanical and ...
Study of protective properties of polymeric coatings for portable solarcell arrays of the BSA-R type in tropical climate conditions
09-Nov-2008 | A. A. Polisan, I. S. Persits, V. N. Ivonin, Chin’ Kuok Kkhan’, V. A. Karpov, Protection of Metals, 2008
The influence of factors of the tropical climate of Vietnam on a variation of functional properties of polymeric coatings for portable solarcell arrays has been studied by 12-month-long tests on the base of the Russian-Vietnamese Tropical Research and Technology Center. As a whole, full-scale ...
Page 1 From 1
