My watch list
my.chemeurope.com  
Login  

449 Newest Publications about the topic high density polyethylene

rss

You can refine your search further. Select from the filter options on the left to narrow down your results.

Energies, Vol. 11, Pages 1448: Electrical Properties of Polyethylene/Polypropylene Compounds for High-Voltage Insulation

04-Jun-2018 | Ahmed Dabbak, Sameh Ziad; Illias, Hazlee Azil; Ang, Bee Chin; Abdul Latiff, Nurul Ain; Makmud, Mohamad Zul Hilmey, Energies, 2018

Energies, Vol. 11, Pages 1448: Electrical Properties of Polyethylene/Polypropylene Compounds for High-Voltage Insulation Energies doi: 10.3390/en11061448 Authors: Sameh Ziad Ahmed Dabbak Hazlee Azil Illias Bee Chin Ang Nurul Ain Abdul Latiff Mohamad Zul Hilmey Makmud In ...

more

Monomer recovery through advanced pyrolysis of waste high density polyethylene (HDPE)

01-Jun-2018 | Laura S. Diaz-Silvarrey; Kui Zhang; Anh N. Phan, Green Chemistry, 2018

Plastic use has increased by twenty fold since the 1950s and so has the amount of plastic waste generated. Although legislation promotes reuse and recycling, still over 50% of Europe's plastic waste is still disposed of into landfills. Therefore, millions of tonnes of plastic end up in the ...

more

Monomer recovery through advanced pyrolysis of waste high density polyethylene (HDPE)

01-Jun-2018 | Laura S. Diaz-Silvarrey; Kui Zhang; Anh N. Phan, Green Chemistry, 2018

Plastic use has increased by twenty fold since the 1950s and so has the amount of plastic waste generated. Although legislation promotes reuse and recycling, still over 50% of Europe's plastic waste is still disposed of into landfills. Therefore, millions of tonnes of plastic end up in the ...

more

Materials, Vol. 11, Pages 807: Debinding and Sintering of an Injection-Moulded Hypereutectic Al–Si Alloy

16-May-2018 | Ni, Jiaqi ; Yu, Muhuo ; Han, Keqing, Materials, 2018

Materials, Vol. 11, Pages 807: Debinding and Sintering of an Injection-Moulded Hypereutectic Al–Si Alloy Materials doi: 10.3390/ma11050807 Authors: Jiaqi Ni Muhuo Yu Keqing Han Hypereutectic Al–Si (20 wt.%) alloy parts were fabricated by employing a powder injection ...

more

Materials, Vol. 11, Pages 613: Injection Molding and Mechanical Properties of Bio-Based Polymer Nanocomposites

17-Apr-2018 | Mistretta, Maria Chiara; Botta, Luigi ; Morreale, Marco ; Rifici, Sebastiano ; Ceraulo, Manuela ; La Mantia, France ..., Materials, 2018

Materials, Vol. 11, Pages 613: Injection Molding and Mechanical Properties of Bio-Based Polymer Nanocomposites Materials doi: 10.3390/ma11040613 Authors: Maria Chiara Mistretta Luigi Botta Marco Morreale Sebastiano Rifici Manuela Ceraulo Francesco Paolo La Mantia The use ...

more

Materials, Vol. 11, Pages 291: HDPE/Chitosan Blends Modified with Organobentonite Synthesized with Quaternary Ammonium Salt Impregnated Chitosan

13-Feb-2018 | de Araújo, Maria José G.; Barbosa, Rossemberg C.; Fook, Marcus Vinícius L.; Canedo, Eduardo L.; Silva, Suédina M. L. ..., Materials, 2018

Materials, Vol. 11, Pages 291: HDPE/Chitosan Blends Modified with Organobentonite Synthesized with Quaternary Ammonium Salt Impregnated Chitosan Materials doi: 10.3390/ma11020291 Authors: Maria de Araújo Rossemberg Barbosa Marcus Fook Eduardo Canedo Suédina Silva Eliton ...

more

Evolution of the Nanoporous Structure of High-Density Polyethylene during Drawing in Supercritical Carbon Dioxide

16-Jan-2018 | Anna O. Dudnik; Elena S. Trofimchuk; Aleksandr V. Efimov; Nina I. Nikonorova; Ekaterina G. Rukhlya; Lev N. Nikitin; ..., Macromolecules, 2018

The process of open-porous structure development in high-density polyethylene (HDPE) films during uniaxial deformation in supercritical carbon dioxide (SC-CO2) fluid at 35 °C and 10 MPa has been studied and visualized by means of atomic force microscopy. We suggest that the supercritical fluid ...

more

Multi‐analytical approach for the morphological, molecular, and mechanical characterization after photo‐oxidation of polymers used in artworks

13-Jan-2018 | Daniela Saviello, Luca Andena, Dario Gastaldi, Lucia Toniolo, Sara Goidanich, Journal of Applied Polymer Science, 2018

ABSTRACT For a proper preservation of plastics objects, it is essential to study the degradation processes involved in both exposed and hidden areas of the polymeric materials. In fact, surface properties can differ significantly from the bulk and can have a strong effect on the artistic ...

more

Fabrication of Sintered Porous Polymeric Materials: Effect of Chain Interdiffusion Time on Mechanical Properties

26-Dec-2017 | Meysam Salari, Gholamreza Pircheraghi, Polymer International, 2017

Abstract In this study, sintered porous polymeric materials made of High Density Polyethylene (HDPE), were fabricated through controlling chains interdiffusion time at the transition temperature of semicrystalline and melt states. At this intermediate state, where both crystalline and ...

more

Compatibility Assessment of Fuel System Infrastructure Plastics with Bio-oil and Diesel Fuel

22-Dec-2017 | Michael D. Kass; Christopher J. Janke; Raynella M. Connatser; Samuel A. Lewis, Sr.; James R. Keiser; Katherine Gaston, Energy & Fuels, 2017

Bio-oil derived via fast pyrolysis is being developed as a renewable fuel option for petroleum distillates. The compatibility of neat bio-oil with 18 plastic types was evaluated using neat diesel fuel as the baseline. The plastic materials included polyphenylene sulfide (PPS), polyethylene ...

more

Page 1 From 45
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE