My watch list  

726 Newest Publications about the topic mills


You can refine your search further. Select from the filter options on the left to narrow down your results.

A Simulation Study of Laboratory Scale Ball and Vertical Stirred Mills

01-Dec-2009 | Samanli, Selcuk; Cuhadaroglu, Dilek; Kizgut, Sait, Particle & Particle Systems Characterization, 2009

Abstract The aim of this study was to investigate the grindability of solid fossil fuels from a thermal power plant by using a vertical stirred mill and conventional ball mill. The solid fossil fuel sample was obtained from the Zonguldak Catalagzi thermal power plant in Turkey. The sample below ...


Developing foundry alloy preparation technique for producing highly porous permeable cellular chromal

06-Nov-2009 | G. V. Bashkirtsev, Russian Journal of Non-Ferrous Metals, 2009

The purpose of the work was to experimentally investigate, simulate, and optimize the crushing methods of foundry alloys. The kinetics of crushing of the Fe-Cr-Al foundry alloy, which was performed in the drum and vibration mills, was investigated. The particle size was determined by two methods, ...


Phase transformation, structural evolution and mechanical property of nanostructured FeAl as a result of mechanical alloying

06-Nov-2009 | M. M. Rajath Hegde, A. O. Surendranathan, Russian Journal of Non-Ferrous Metals, 2009

Objective of the work was to synthesize nanostructured FeAl alloy powder by mechanical alloying (MEA). The work concentrated on synthesis, characterization, structural and mechanical properties of the alloy. Nanostructured FeAl intermetallics were prepared directly by MEA in a high energy rate ...


Dextranase in sugar industry: A review

25-Jul-2009 | Efraín Rodríguez Jiménez, Sugar Tech, 2009

In sugar production, dextrans are undesirable compounds synthesized by contaminant microorganisms from sucrose, increasing the viscosity of the flow and reducing industrial recovery, bringing about significant losses. The use of the dextranase enzyme is the most efficient method for hydrolyzing ...


The Role of Particle Morphology in the Mechanochemical Activation of Hematite

03-Nov-2004 | M. Sorescu, D. Tarabasanu-Mihaila, L. Diamandescu, Journal of Materials Synthesis and Processing, 2004

Hematite particles of four morphologies (polyhedral, platelike, needlelike, and disk shape) were synthesized by the hydrothermal method. The morphology and average particle diameter (1.4, 7.4, 0.2, and 0.12 µm, respectively) were determined by transmission electron microscopy (TEM) combined with ...


Preparation of a Fine Powder of a Bi-Based High-Tc Ceramic Superconductor by Wet Ball-Milling: Effect of Fluids on Grinding Performance

03-Nov-2004 | Hidenobu Itoh, Koichiro Nakai, Shinichi Motai, Satoshi Maeda, Journal of Materials Synthesis and Processing, 2004

A Bi-based high-Tc ceramic superconductor (Bi1.6Pb0.4Sr2Ca2Cu3Ox) was milled in various fluids and the effect of fluids on the crystal structure and morphology of the milled powder was studied. It was found that methyl acetate is an excellent fluid for wet grinding without decomposition of the ...


Page 73 From 73
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE