My watch list
my.chemeurope.com  
Login  

109 Newest Publications about the topic thermal oxidizers

rss

You can refine your search further. Select from the filter options on the left to narrow down your results.

Growth and structure of PbWO4 films

14-Feb-2012 | Yu. V. Gerasimenko, V. A. Logacheva, S. V. Zaitsev, A. M. Khoviv, Inorganic Materials, 2012

Lead tungstate films have been grown on silicon by magnetron sputtering followed by heat treatment at various temperatures. The thermal oxidation of metal-oxide (Pb/WO3/Si and W/PbO2/Si) and metal-metal (Pb/W/Si) bilayer systems at temperatures above 870 K yields films that are dominated by ...

more

Collapse of Cr(OH)3/n‐Si Schottky barrier and growth of atomic bridging–type surface photovoltages in Cr‐deposited n‐type Si(001) wafers

07-Feb-2012 | Shimizu, Hirofumi; Sanada, Yuji, Surface and Interface Analysis, 2012

In Cr aqueous solution–rinsed n‐type Si(001) wafers, long air exposure at room temperature and/or thermal oxidation for a short time (10 min) at 100 °C collapses the Cr(OH)3/n‐Si Schottky barrier, transforming into the atomic bridging–type (Cr‐induced negative charge) surface photovoltage (SPV). ...

more

Collapse of Cr(OH)3/n‐Si Schottky barrier and growth of atomic bridging–type surface photovoltages in Cr‐deposited n‐type Si(001) wafers

07-Feb-2012 | Shimizu, Hirofumi; Sanada, Yuji, Surface and Interface Analysis, 2012

In Cr aqueous solution–rinsed n‐type Si(001) wafers, long air exposure at room temperature and/or thermal oxidation for a short time (10 min) at 100 °C collapses the Cr(OH)3/n‐Si Schottky barrier, transforming into the atomic bridging–type (Cr‐induced negative charge) surface photovoltage (SPV). ...

more

Thermal Oxidation Studies on Reduced Folate, L‐5‐Methyltetrahydrofolic Acid (L‐5‐MTHF) and Strategies for Stabilization Using Food Matrices

07-Feb-2012 | Liu, Yazheng; Tomiuk, Stephen; Rozoy, Elodie; Simard, Stephan; Bazinet, Laurent; Green, Timothy; Kitts, David D., Journal of Food Science, 2012

Abstract:  The thermal stability of L‐5‐methyltetrafolic acid (L‐5‐MTHF) was investigated in model/buffer systems and food systems. L‐5‐MTHF degradation followed first‐order reaction kinetics with relatively greater (P

more

Influence of gate thermal oxide layer on InGaP/InGaAs doping-channel field-effect transistors

04-Feb-2012 | Jung-Hui Tsai, Materials Chemistry and Physics, 2012

In this article, the significant effect of a thin gate thermal oxide layer on InGaP/InGaAs doping-channel field-effect transistors (DCFETs) is first demonstrated. When compared to the conventional InGaP/InGaAs DCFET, the device with the gate thermal oxide layer exhibits a higher gate turn-on ...

more

Thermal properties of fats extracted from powdered baby formulas

03-Feb-2012 | Magdalena Wirkowska, Ewa Ostrowska-Ligęza, Agata Górska, Piotr Koczoń, Journal of Thermal Analysis and Calorimetry, 2012

The aim of this research was to analyse composition, fatty acids distribution and oxidative stability of fats extracted from four samples of baby formulas. The fats were oxidized in a differential scanning calorimeter (DSC) under polythermal (dynamic) conditions and at normal pressure. The DSC ...

more

Summary of ISO/TC 201 Standard: ISO 14701:2011 – Surface chemical analysis – X‐ray photoelectron spectroscopy—measurement of silicon oxide thickness

30-Jan-2012 | Seah, M. P., Surface and Interface Analysis, 2012

This International Standard specifies several methods for measuring the oxide thickness at the surfaces of (100) and (111) silicon wafers as an equivalent thickness of silicon dioxide when measured using X‐ray photoelectron spectroscopy. It is only applicable to flat, polished samples and for ...

more

Summary of ISO/TC 201 Standard: ISO 14701:2011 – Surface chemical analysis – X‐ray photoelectron spectroscopy—measurement of silicon oxide thickness

30-Jan-2012 | Seah, M. P., Surface and Interface Analysis, 2012

This International Standard specifies several methods for measuring the oxide thickness at the surfaces of (100) and (111) silicon wafers as an equivalent thickness of silicon dioxide when measured using X‐ray photoelectron spectroscopy. It is only applicable to flat, polished samples and for ...

more

Cure characteristics and properties of NBR composites filled with co‐precipitates of black liquor and montmorillonite

08-Jul-2011 | Liao, Zedong; Wang, Xi; Xu, Yuanhua; Feng, Jianxiang; Zhu, Jin; Su, Shengpei, Polymers for Advanced Technologies, 2011

Acrylonitrile‐butadiene rubber (NBR) composites filled with co‐precipitates of black liquor and montmorillonite (CLM) were prepared by mechanical mixing on a two‐roll mill. The cure characteristics, mechanical properties, thermal properties, and thermo‐oxidative aging properties of NBR/CLM ...

more

Page 11 From 11
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE