My watch list  

159 Newest Publications about the topic trimethylolpropane


You can refine your search further. Select from the filter options on the left to narrow down your results.

Materials, Vol. 9, Pages 999: New Elastomeric Materials Based on Natural Rubber Obtained by Electron Beam Irradiation for Food and Pharmaceutical Use

21-Dec-2016 | Craciun, Gabriela ; Manaila, Elena ; Stelescu, Maria Daniela, Materials, 2016

The efficiency of polyfunctional monomers as cross-linking co-agents on the chemical properties of natural rubber vulcanized by electron beam irradiation was studied. The following polyfunctional monomers were used: trimethylolpropane-trimethacrylate, zinc-diacrylate, ethylene glycol ...


Construction of di(trimethylolpropane) cross linkage and phenylnaphthalene structure coupled with selective [small beta]-O-4 bond cleavage for synthesizing lignin-based epoxy resins with controlled glass transition temperature

22-Sep-2016 | Atsushi Kaiho; Daniele Mazzarella; Masamitsu Satake; Makiko Kogo; Ryo Sakai; Takashi Watanabe, Green Chemistry, 2016

Lignin, the most abundant aromatic polymer in nature, is a potential renewable source of aromatic compounds in a post-oil era. Lignin is a prospective raw feedstock for epoxy resin because of its phenolic hydroxyl group, which offers a reaction point for glycidylation. However, precisely ...


Epoxy-thiol thermosets modified by carbazole decorated hyperbranched poly(ethyleneimine) for optical applications

11-Sep-2016 | Author(s): O. Korychenska, C. Acebo, M. Bezuglyi, A. Serra, J.V. Grazulevicius, Reactive and Functional Polymers, 2016

Publication date: September 2016 Source:Reactive and Functional Polymers, Volume 106 Author(s): O. Korychenska, C. Acebo, M. Bezuglyi, A. Serra, J.V. Grazulevicius New epoxy-thiol thermosets containing carbazolyl moieties were prepared by adding different proportions of a ...


Structure-reactivity relationships of novel monomeric photoinitiators

14-Aug-2016 | Author(s): Sesil Agopcan Cınar, Melek Naz Guven, Tugce Nur Eren, Belgin Cesur, Mina Aleksanyan, Burcu De ..., Journal of Photochemistry and Photobiology A: Chemistry, 2016

Publication date: 1 October 2016 Source:Journal of Photochemistry and Photobiology A: Chemistry, Volume 329 Author(s): Sesil Agopcan Cınar, Melek Naz Guven, Tugce Nur Eren, Belgin Cesur, Mina Aleksanyan, Burcu Dedeoglu, Neren Okte, Viktorya Aviyente, Fabrice Morlet-Savary, ...


Mass-Transfer-Induced Multistep Phase Separation in Emulsion Droplets: Toward Self-Assembly Multilayered Emulsions and Onionlike Microspheres

29-Jul-2016 | Shuaishuai Liang; Jiang Li; Jia Man; Haosheng Chen, Langmuir, 2016

Mass-transfer-induced multistep phase separation was found in emulsion droplets. The agent system consists of a monomer (ethoxylated trimethylolpropane triacrylate, ETPTA), an oligomer (polyethylene glycol diacrylate, PEGDA 700), and water. The PEGDA in the separated layers offered partial ...


One‐component thioxanthone‐based polymeric photoinitiators

21-Jul-2016 | Tugce Nur Eren, Neren Okte, Fabrice Morlet‐Savary, Jean Pierre Fouassier, Jacques Lalevee, Duygu Avci, Journal of Polymer Science Part A: Polymer Chemistry, 2016

ABSTRACT The photochemical and photophysical properties of new polymeric photoinitiators (PPIs) containing pendant thioxanthone (TX) and amine moieties are studied. The PPIs are synthesized by copolymerization of tert‐butyl 2‐((9‐oxo‐9H‐thioxanthen‐2‐yloxy)methyl)acrylate (TX1) with ...


Flexible and Bio‐Based Nonisocyanate Polyurethane (NIPU) Foams

10-Jun-2016 | Hannes Blattmann, Marc Lauth, Rolf Mülhaupt, Macromolecular Materials and Engineering, 2016

The amine cure of cyclic carbonate blends, derived from renewable resources and carbon dioxide, in the presence of a liquid fluorohydrocarbon as physical blowing agent with no ozone depletion potential, enables the facile tailoring of flexible bio‐based nonisocyanate polyurethane (NIPU) foams. ...


Preparation and properties of short oil alkyd resin/TiO2 nanocomposites based on surface modified TiO2 nanoparticles

06-Jun-2016 | Tijana S. Radoman, Jasna V. Džunuzović, Pavle M. Spasojević, Milena T. Marinović‐Cincović, Katarina B. Jeremić, Ivan ..., Polymer Composites, 2016

Alkyd resin/TiO2 nanocomposites (NC) were prepared from short oil alkyd resin and TiO2 nanoparticles (NPs) surface modified with in situ formed imine ligand, based on 3,4‐dihydroxybenzaldehyde and oleylamine, or with three gallic acid esters. The short oil alkyd resin was synthesized from ...


Preparation of Enhanced Poly(butylene succinate) Foams

01-Jun-2016 | Zhengming Feng, Yu Luo, Yuzhuo Hong, Jiawei Wu, Jian Zhu, Haibo Li, Rongrong Qi, Pingkai Jiang, Polymer Engineering and Science, 2016

Biodegradable poly(butylene succinate) (PBS) foams with high performance are usually difficult to be prepared because of its lower melt viscosity. Herein, high‐melt‐viscosity PBS was firstly prepared by combining the in situ reaction between carboxyl‐ended polyester (CP) and solid epoxy (SE) ...


Synthesis and application of dyes derived from benz[cd]indol‐2(1H)‐one as visible‐light‐absorbing polymerisation photoinitiators

28-Apr-2016 | Rafał Strzelczyk, Radosław Michalski, Radosław Podsiadły, Coloration Technology, 2016

Several potential initiators based on benz[cd]indol‐2(1H)‐one dye have been synthesised and evaluated in the radical polymerisation of a system containing trimethylolpropane triacrylate under visible light. Absorption, fluorescence, and phosphorescence spectra and the electrochemical properties ...


Page 3 From 16
Subscribe to e-mail updates relating to your search

You will receive via e-mail the latest search results matching your search criteria. This service is free of charge and can be cancelled at any time.

Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE