RFID technology is on the advance. But, up to now radio chips primarily supply data for the identification of products. Researchers have now developed a transponder which measures temperature, pressure and humidity. The chip with sensor function could revolutionize the applications market.
»Special storage instructions: The serum has to be stored at between +2° Celsius and +8° Celsius. Freezing as well as storage at a higher temperature has to be avoided as the efficacy and tolerability could be affected.« Instructions of this kind are found on many package inserts. Drugs, vaccines or banked blood are very sensitive to temperature. Therefore, doctors, pharmacists and hospitals have a refrigerator for this purpose. But, what happens during transport between the pharmaceutical supplier and the ultimate customer? In order to monitor temperatures during transport, manufacturers can rely on a new RFID technology in future: If the temperature rises unexpectedly during refrigerated transport, the intelligent chip notices the variation immediately and reports the fact to the reader.
This extended RFID technology is a development of the Fraunhofer Institute for Photonic Microsystems IMPS located in Dresden. The researchers have fitted the small radio labels with a sensor. Now this new type of transponder transmits not only data, such as batch or identification numbers. They have integrated sensors which measure certain parameters: irrespective of whether it is temperature, pressure or humidity - the requested ambient parameter is permanently controlled in this way. »We have combined the UHF (Ultra-High Frequency) transponder technology with sensor technology«, says project manager Hans-Jürgen Holland.
The UHF transponders transmit signals in a frequency range between 860 Megahertz and 2.45 Gigahertz, and have a larger transmission range than conventional RFID transponders. But, joining a transponder with a sensor module has been a challenge to researchers so far: »The maximum energy which can be transmitted to a UHF transponder is very low«, explains Hans-Jürgen Holland. Passive tags are radio chips which draw the energy for signal transmission from the energy field of the reader – that is from the unit which receives and reads all data. Thus, passive transponders do not need a current source of their own, but however they can operate only in the range of the reader. As a rule this is between two and six metres in UHF transponders. »Given this tight energy balance, it has not been possible up to now to integrate sensory functions in addition«, explains Hans-Jürgen Holland. »After all, the sensors need current as well. But now we have managed«, says the researcher. A micro-controller on the module ensures that the data measured by the sensor are compressed and partially processed. In this way the data volume which the transponder transmits to the reader is decreased – the energy consumption decreases as well. In addition, the reader can transmit the command to control the sensors. Thus, they are not in continuous operation. Now the researchers have developed a basic element which can be adapted to the requested applications of the customer. This module contains specifically manufactured chips suitable for series production which permit the transponder module and the sensor module to be coupled.
Researchers anticipate many areas of application for the UHF transponder technology, primarily in the medical field – they call it Lifetronics: apart from conventional batch documentation, the tags could be used to monitor the cold chain of blood products or vaccines. But, plasters could also be provided with the transponders. Moisture and temperature provide information on the progress of wound healing. During the Electronica Fair organised in Munich from 9th to 12th November, the experts will present an evaluation kit which consists of a motherboard, two antennas for UHF and MW range and the software. Thus, users can develop their individual solutions.
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.
The additive manufacture of large-volume plastic components is a time-consuming undertaking. Researchers at the Fraunhofer Institute for Machine Tools and Forming Technology IWU have now developed Screw Extrusion Additive Manufacturing (SEAM), a system and process that is eight times faster ... more
CAPE® is a transportable, tent-like cleanroom facility developed by researchers at the Fraunhofer Institute for Manufacturing Engineering and Automation IPA. It can be installed both indoors and in unexposed outdoor locations, and takes less than an hour to set up. The inspiration for this ... more
The Fraunhofer-Gründerpreis 2018, worth 5000 euros, was awarded to Visometry GmbH, a spinoff from the Fraunhofer Institute for Graphic Data Processing (IGD). The Visometry team convinced the jury consisting of members from the Fraunhofer-Gesellschaft and the High-Tech Gründerfonds (HTGF) wi ... more
CEA, Fraunhofer IPMS, IBM, Aixtron, CNRS, GSS and University of Glasgow start joint project on Carbon Nanotube Composite Interconnects (CONNECT) to enable future CMOS scaling.
A European consortium of seven research and industry partners have started a joint four million Euro project over t ... more
The Fraunhofer Institute for Photonic Microsystems IPMS will be presenting an extremely miniaturized near-infrared spectrometerThis device enables analysis of gaseous, liquid and solid materials immediately on site instead of taking samples for lab analysis. The optical bench is smaller tha ... more
Scientist Jan Meiß has been awarded with the »Green Photonics« for young academics on April 23, 2012 at the Hanover Fair. Within his dissertation in cooperation with Heliatek GmbH and Fraunhofer IPMS – COMEDD he succeeded in the development of new concepts for organic solar cells with high ... more