My watch list
my.chemeurope.com  
Login  

PH helmet



The P helmet, PH helmet and PHG helmet were early types of gas mask issued by the British Army in the First World War, to protect troops against chlorine, phosgene and tear gases. Rather than having a separate filter for removing the toxic chemicals, they consisted of a gas-permeable hood worn over the head which was treated with chemicals.

Additional recommended knowledge

The P Helmet, also known as the Tube Helmet, appeared in July 1915,[1] replacing the simpler Pyro (or Smoke) Helmet. It featured two mica eyepieces instead of the single visor of its predecessor, and added an exhaust valve fed from a metal tube which the wearer held in his mouth. The exhaust valve was needed because a double layer of flannel – one treated and one not – was needed because the solution attacked the fabric.

It had flannel layers of cloth-dipped in sodium phenolate and glycerin and protected against chlorine and phosgene, but not against tear gas. Around 9 million were made.

The PH Helmet (Phenate Hexamine) replaced it in October 1915, and added hexamethylene tetramine, which greatly improved protection against phosgene[2] and added protection against hydrocyanic acid.[3] Around 14 million were made and it remained in service until the end of the war by which time it was relegated to second line use.

The PHG Helmet appeared in January 1916 and was similar to the PH Helmet but had a facepiece made of rubber sponge to add protection against tear gas. Around one and a half million were produced in 1916-1917.

It was finally superseded by the small box respirator in February 1916, which was much more satisfactory against high concentrations of phosgene or lachrymators.

References

  1. ^ CWS Barker (1926). "Gas mask development". Chemical warfare 12 (7): 11-15.
  2. ^ The Riddle of the Rhine: Chemical Strategy in Peace and War, Victor LeFebure, at Project Gutenberg
  3. ^ History of the U.S. Army's protective mask
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "PH_helmet". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE