Ceramics

Companies Ceramics

nanopool GmbH, Germany

nanopool® GmbH, located in Schwalbach-Hülzweiler (Germany), is an innovative family business. Since 2001, it belongs to the businesses which deal with nanotechnology in the surface refinement field. nanopool® has accomplished to develop a surface refinement for nearly every field of application. Th more

FRIATEC AG, Germany

FRIATEC AG Mannheim - founded in 1860 - covering an area of approx. 350.00 m2 - about 1100 employees - turnover 190 Mio € - specialist for corrosion- and wear-resistant materials - industrial activities: plastic products, mechanical engineering and industrial ceramics more

Products Ceramics

FRITSCH Planetary Ball Mills – High-performance all-rounders in routine laboratory work!

For wet and dry comminution of a few milligrams up to several kilograms down to fineness levels below 1 µm – absolutely reliable, especially easy to operate and clean more

News Ceramics

• Thermal Properties of Ceramics at a Glance
  

  For targeted applications involving ceramic materials, precise knowledge about thermal properties is essential. These values can often be determined by means of Thermal Analysis methods. The new poster “Thermal Properties of Ceramics” offers the following important values at a glance: melting temper more

• Nanocrystals Make Dentures Shine
  

  The hardest substance in the human body is moved by its strongest muscles: When we heartily bite into an apple or a schnitzel, enormous strengths are working on the surface of our teeth. “What the natural tooth enamel has to endure also goes for dentures, inlays or bridges“, glass chemist Prof. Dr. more

• Researchers image atomic structural changes that control properties of sapphires

  Materials scientists from Case Western Reserve University and the Institute of Solid State Research in Jülich, Germany have produced particularly clear changes in the atomic structure of sapphire following deformation at high temperatures. Peering through an electron microscope down to a level wher more

White papers Ceramics

• Pressure Digestion for Sample Preparation
  

  What analyst does not wish for a universal method for processing all his or her samples? Pressure digestion represents just such a procedure for sample digestions and is therefore one of the standard sample preparation procedures currently employed in analytical chemistry for element quantification more

• UV/Vis/NIR Spectrometry for the Film Thickness Determination of Transparent Films and Layers
  

  Within nearly all branches of industry we find products, which are coated with thin transparent layers to improve the surface features: Window sheet glasses obtain changes in reflection and absorption behavior, ceramics are treated with coatings to lower water adhesion, coatings on metals create corrosion resistance or better sliding factors. Transparent coatings play also a major role in the semiconductor business. One of the important features to be determined and controlled is the thickness of the layers to balance performance and material input during development and production more

• A Platform System for Microwave Sample Preparation
  

  Today's technology enables the near-perfect determination of trace elements in all concentrations down to the ultra trace range. Modern AAS, ICP-OES, ICP-MS or electrochemical procedures such as voltammetry are reliable and accurate measuring methods for almost every type of task. However, in most cases the sample material has to be supplied in a suitable, measurable form, i.e. as a largely matrix-free solution without contamination or loss of analytes more

Publications Ceramics

• Effect of La2O3 Addition on Copper‐Nickel Manganese Thermistors for Low‐Temperature Applications

  The introduction of La2O3 to Mn0.75Ni1.25CuO4 ceramics was studied on the microstructure and electrical properties. The sintered Mn0.75Ni1.25CuO4‐xLa2O3 (0 ≤ x ≤ 0.3) bodies was typical polycrystalline, with cubic spinel structure of copper manganese oxide, rocksalt structure of nickel copper oxid more

• ChemInform Abstract: Mechanical Properties of Kaolin‐base Ceramics During Firing

  Abstract Review: 30 refs. more

• Low‐Temperature Sintering and Microwave Dielectric Properties of (Mg0.95Zn0.05)2(Ti0.8Sn0.2)O4–(Ca0.8Sr0.2)TiO3 Composite Ceramics

  0.9(Mg0.95Zn0.05)2(Ti0.8Sn0.2)O4–0.1(Ca0.8Sr0.2)TiO3 (MZTS–CST) ceramics were prepared by a conventional solid‐state route. The MZTS–CST ceramics sintered at 1325°C exhibited εr = 18.2, Q × f = 49 120 GHz (at 8.1 GHz), and τf = 15 ppm/°C. The effects of LiF–Fe2O3–V2O5 (LFV) addition on the sintera more

Market studies Ceramics

• GOO CHEMICAL CO., LTD. (4962) - Financial and Strategic SWOT Analysis Review

  GOO CHEMICAL CO., LTD. (GOO CHEMICAL) is a specialty chemical company based in Japan. It is engaged in the production and supply of specialty chemical products, including resins, sizing and oiling agents, cosmetic resins, and other chemical products in Japan and internationally. The company serves t more

• Impact Coatings AB (IMPC) - Financial and Strategic SWOT Analysis Review

  Impact Coatings AB (Impact Coatings) is a technology based company that develops and commercializes its technology for physical vapor deposition (PVD) coating processes. PVD is a method to apply thin films of metals and ceramics on various components. The lead product of the company Inline Coater en more

• China Lithium Carbonate Industry Report, 2009

  Lithium carbonate has been widely applied not only in battery, glass, ceramics, chemicals, lubricants and pharmaceutical, etc industries, but also in synthetic rubber, dyes, semiconductor and most advanced industries. The global lithium carbonate market has an exceedingly high concentration degree. more

Websites Ceramics