My watch list
my.chemeurope.com  
Login  

Hard rime



    Hard rime is a white ice that forms when the water droplets in fog freeze to the outer surfaces of objects. It is often seen on trees atop mountains and ridges in winter, when low-hanging clouds cause freezing fog. This fog freezes to the windward (wind-facing) side of tree branches, buildings, or any other solid objects, usually with high wind velocities and air temperatures between -2 °C (28 °F) and -8 °C (18 °F).

Hard rime formations are difficult to be shaken off; they have a comb-like appearance, unlike soft rime, which looks feathery or spiky, or clear ice, which looks homogenous and transparent.

Scientists at meteorologically-extreme places such as Mount Washington in New Hampshire often have to break huge chunks of hard rime off weather equipment, in order to keep anemometers and other measuring instruments operating.

Meteorologists distinguish between three basic types of ice forming on vertical and horizontal surfaces by deposition of supercooled water droplets. Of course there are also intermediate formations.

  • Soft rime is less dense than hard rime and is milky and crystalline, like sugar.
  • Hard rime is somewhat less milky, especially if it is not heavy.
  • Clear ice is transparent and homogeneous and resembles ice-cube ice in appearance. Its amorphous, dense structure helps it cling tenaciously to any surface on which it forms.

Both rime types are less dense than clear ice and cling less tenaciously, therefore damage due to rime is generally minor compared to clear ice. Glaze ice is similar in appearance to clear ice but it is the result of a completely different process, occurring during freezing rain or drizzle.

These three types occur also when ice forms on the surface of an aircraft when it flies through a cloud made of supercooled water liquid droplets. Rime ice is the less dense, milky ice is intermediate and clear ice is the most dense. Dense ice can spoil lift and may have a catastrophic effect on an airborne aircraft.

Formation on snow crystals

  Under some atmospheric conditions, forming and descending snow crystals may encounter and pass through atmospheric supercooled cloud droplets. These droplets, which have a diameter of about 10 μm, can exist in the unfrozen state down to temperatures near -40 °C. Contact between the snow crystal and the supercooled droplets results in freezing of the liquid droplets onto the surface of the crystals. This process of crystal growth is known as accretion. Crystals that exhibit frozen droplets on their surfaces are referred to as rimed. When this process continues so that the shape of the original snow crystal is no longer identifiable, the resulting crystal is referred to as graupel.[1]

The frozen droplets on the surface of rimed crystals are hard to resolve and the topography of a graupel particle is not easy to record with a light microscope because of the limited resolution and depth of field in the instrument. However, observations of snow crystals with a low-temperature scanning electron microscope (LT-SEM) clearly show cloud droplets measuring up to 50 μm on the surface of the crystals. The rime has been observed on all four basic forms of snow crystals, including plates, dendrites, columns and needles. As the riming process continues, the mass of frozen, accumulated cloud droplets obscures the identity of the original snow crystal, thereby giving rise to a graupel particle.[1]

References

  1. ^ a b "Rime and Graupel". Electron Microscopy Unit, Beltsville Agricultural Research Center, U.S. Department of Agriculture. Public domain. URL accessed 2006-07-23.
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Hard_rime". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE