The effects of hydrogen on growing carbon nanotubes
carbon nanotubes -- long, hollow cylinders of carbon billionths of a meter in diameter -- have many potential uses in nanotechnology, optics, electronics, and many other fields. The exact properties of nanotubes depend on their structure, and scientists as yet have little control over that structure, which is determined during the initial formation -- or growth -- of the nanotubes. In fact, says chemical engineer and materials scientist Eray Aydil of the University of Minnesota, "we do not know precisely how the nanotubes grow."
In a paper in the American Institute of Physics' Journal of Applied Physics, Aydil, professor of chemical engineering and materials science and the Ronald L. and Janet A. Christenson Chair in Renewable Energy, and his colleagues shed new light on the process. In particular, the researchers examined the influence of hydrogen gas.
"Carbon nanotubes grow from a metal catalyst particle that is immersed in a gas like methane," Aydil explains. "Sometimes hydrogen gas is also added and it was found that a little bit of hydrogen helps to grow carbon nanotubes with nice straight walls and with few defects. However, too much hydrogen addition gives fibers with thick walls, instead of nanotubes, or no growth at all."
To understand why, Aydil and colleagues used transmission electron microscopy and other methods to systematically image and characterize the effects of increasing concentrations of hydrogen. "It turns out that the iron metal catalysts turn to iron carbide by reacting with the carbon in methane. Iron carbide is a hard material that is not easily deformed, and carbon nanotubes grown from such catalysts tend to have nice straight walls," he says.
Adding more hydrogen to the mix causes iron carbide to turn into iron -- which is more malleable and ductile, and "deforms into shapes that give rise to more fiber-like structures rather than hollow carbon nanotubes," he says. At higher concentrations, hydrogen etches the forming carbon nanotubes, "and growth stops all together. It is the interaction of the hydrogen with the catalysts and its effect on the catalyst's structure that controls the carbon nanotube structure."
Original publication: Michael J. Behr, E. Ashley Gaulding, K. Andre Mkhoyan, and Eray S. Aydil; "Effect of hydrogen on catalyst nanoparticles in carbon nanotube growth"; J. Appl. Phys. 108, 053303 (2010)
Other news from the department science
Most read news
More news from our other portals
Last viewed contents
Proteinogenic_amino_acid
Lonza extends tender offer for all outstanding shares of Arch Chemicals common stock
Empa - Swiss Federal Laboratories for Materials Testing and Research - Dübendorf, Switzerland
The Linde Group acquires the remaining 50 percent of the shares in the Australian LPG company Elgas
List_of_drugs:_Pf-Ph
Desitin_Arzneimittel_GmbH
Emerson Digitally Automates $375 Million Expansion of Coal Gasification Plant at Shanghai Coking & Chemical Corporation - Emerson PlantWeb architecture and engineering services selected for project that doubles output of methanol to meet the strong market requirement
Malvern Instruments enters distribution partnership with Parsum GmbH
Sometimes less is more - RUB researchers unmask Janus-faced nature of mechanical forces with the Jülich supercomputer
Ciba Specialty Chemicals submits FDA master file for new antimicrobial test method NUMETRIKA
