Ion sources:
OptiSpray Ion Source and Cartridge Columns
Plug-and-play nano- and capillary-flow LC-MS for proteomics, metabolomics and lipidomics
Set up in seconds: plug-and-play cartridges, no fittings or fragile emitters
Expert-level, reproducible results without years of ESI experience
Reduce downtime: Exchangeable emitters extend column life and help keep the MS cleaner
Deep, reproducible results across columns and instruments, without years of electrospray experience
Thermo Scientific OptiSpray Technology is an intelligent electrospray ionization (ESI) interface that makes high-quality, reproducible nano- and capillary-flow LC-MS data accessible to non-experts. It combines the OptiSpray Ion Source, which automatically positions the emitter, with OptiSpray Cartridge Columns that install in seconds. Less handling of fragile columns, emitters and fittings means faster setup, simpler troubleshooting, and improved quantitative accuracy and precision – from targeted biomarker assays to discovery proteomics, metabolomics and lipidomics.
Simplicity for every LC-MS user
A simple turn of the handle installs the cartridge. All connections are made automatically, with no fittings or dead volume, leak-tested up to 1,500 bar. Ryan Lieb, Ph.D., Stanford University Mass Spectrometry, says the intuitive design helps researchers “quickly produce robust proteomics results without extensive training.” Thomas Conrads, Ph.D., Inova Women’s Service Line, says OptiSpray technology “democratizes electrospray ionization by eliminating the skill gap in emitter positioning.”
Performance for deep, reproducible proteome coverage
The Quick Optimization Routine automatically finds the emitter position with the highest signal. Jun Qu, Ph.D., University at Buffalo, reports “exceptional run-to-run reproducibility across thousands of biological samples.” Application note results:
- Up to ~8,600 protein groups from 200 ng FFPE lung tissue in a 20-min gradient on a Thermo Scientific Orbitrap Astral MS
- 5,000 protein groups from 250 pg HeLa digest (about one cell) on the Orbitrap Tribrid Apex MultiOmics MS – 51% more proteome depth than the previous setup
- Median CVs reduced by >30% vs. a 25 cm packed-bed column from another supplier for low-input samples
- Protein group CVs of 1.9–3.9% in neat and depleted plasma on the Orbitrap Excedion Pro MS
- Sub-femtomole sensitivity and <0.6% retention time variation for targeted peptide quantitation on the TSQ Certis MS
Reliability across columns, users and LC-MS systems
Built-in cartridge memory stores usage data and source settings for easy method transfer. Integrated sheath gas increases spray stability at capillary flow rates. User-replaceable emitters mean a clogged emitter no longer means a lost column. Between injections, the emitter moves to an inactive spray position, keeping column impurities away from the MS inlet.
OptiSpray Ion Source
An all-in-one ESI source for MS calibration, compound optimization and data acquisition at nano- and capillary-flow rates, with automated 3D emitter optimization (incl. FAIMS routine), two cameras for spray visualization, spray current monitoring and easy connection to low-flow UHPLC systems.
OptiSpray Cartridge Columns
Available with PepMap Neo and µPAC Neo C18 chemistries for flow rates from 0.1 to 4 µL/min:
- µPAC Neo 50 cm (0.1–0.75 µL/min)
- µPAC Neo HT (0.3–3 µL/min)
- PepMap Neo 75 µm x 15 cm (0.1–1.5 µL/min) and 75 µm x 50 cm (0.1–0.7 µL/min)
- PepMap Neo 150 µm x 15 cm (0.8–4 µL/min)
Accessory cartridges for calibration, infusion and source diagnostics.
Compatible mass spectrometers
Orbitrap Astral, Orbitrap Tribrid, Orbitrap Excedion and Excedion Pro, Orbitrap Exploris, Stellar, and TSQ Altis Plus, TSQ Quantis Plus and TSQ Certis triple quadrupole MS.
For Research Use Only. Not for use in diagnostic procedures.
1
OptiSpray Ion Source with cartridge portfolio: PepMap Neo and µPAC Neo columns plus source diagnostic and infusion cartridges
2
OptiSpray Ion Source + OptiSpray Cartridge Column: mount the source on the MS, insert the cartridge, don
3
Complete LC-MS setup: Vanquish Neo UHPLC system with OptiSpray Ion Source and FAIMS Pro Duo interface on an Orbitrap Excedion Pro MS
Request information about OptiSpray Ion Source and Cartridge Columns now
Ion sources: OptiSpray Ion Source and Cartridge Columns
Plug-and-play nano- and capillary-flow LC-MS for proteomics, metabolomics and lipidomics