My watch list  

Potassium ferricyanide

Potassium ferricyanide
IUPAC name Potassium hexacyanoferrate(III)
Other names Red prussiate
Prussian red
Potassium ferricyanide
CAS number 13746-66-2
RTECS number LJ8225000
Molecular formula C6N6FeK3
Molar mass 329.24 g/mol
Appearance red solid
Density 1.89 g/cm3, solid
Melting point

(? K)

Boiling point


Solubility in water 33 g/100 mL ("cold water")
77.5 g/100 ("hot water")[1]
Crystal structure monoclinic,
Main hazards toxic
R-phrases 32
S-phrases none
Related Compounds
Other anions Potassium ferrocyanide
Except where noted otherwise, data are given for
materials in their standard state
(at 25 °C, 100 kPa)

Infobox disclaimer and references

Potassium ferricyanide is the chemical compound with the formula K3[Fe(CN)6]. This bright red salt consists of the coordination compound [Fe(CN)6]3−.[2] It is soluble in water and its solution shows some green-yellow fluorescence.

Additional recommended knowledge



Potassium ferricyanide is manufactured by passing chlorine through a solutions of potassium ferrocyanide. Potassium ferricyanide separates from the solution:

2K4[Fe(CN)6] + Cl2 → 2K3[Fe(CN)6] + 2KCl


The compound has widespread use in blueprint drawing and in photography (Cyanotype process). Iron and copper toning involve the use of potassium ferricyanide. Potassium ferricyanide is used as an oxidizing agent to remove silver from negatives and positives, a process called dot etching. In color photography, potassium ferricyanide is used to reduce the size of color dots without reducing their number, as a kind of manual color correction. The compound is also used to temper iron and steel, in electroplating, dyeing wool, as a laboratory reagent, and as a mild oxidizing agent in organic chemistry. It is also used in photography with sodium thiosulfate (hypo) to reduce the density of a negative where the mixture is known as Farmer's reducer; this can help offset problems from overexposure. Variants of Farmer's reducer can also be used as the intermediate step in reversal photography to dissolve the silver image produced by the first development.

Potassium ferricyanide is also one of two compounds present in ferroxyl indicator solution (along with phenolphthalein) which turns blue (Prussian blue) in the presence of Fe2+ ions, and which can therefore be used to detect metal oxidation that will lead to rust. It is possible to calculate the number of moles of Fe2+ ions by using a colorimeter, because of the very intense color of Prussian blue Fe4[Fe(CN)6]3.

Potassium ferricyanide is often used in physiology experiments as a means of increasing a solution's redox potential (Eo' ~ 436 mV at pH 7). Sodium dithionite is usually used as a reducing chemical in such experiments (Eo' ~ −420 mV at pH 7).

Potassium ferricyanide is the main component of Murakami's etchant for cemented carbides.

Prussian blue

Prussian blue, the deep blue pigment in blue printing, is generated by the reaction of K3[Fe(CN)6] with ferrous (Fe2+) ions.[3]

In histology, potassium ferricyanide is used to detect ferrous iron in biological tissue. In this reaction, potassium ferricyanide reacts with ferrous iron in acidic solution to produce an insoluble blue pigment, and both the stain and the pigment are commonly referred to as Turnbull's blue. To detect ferric (Fe3+) iron, potassium ferrocyanide is used instead; the stain and pigment produced are commonly known as Prussian blue.[4] It has been found that the compound formed in the Turnbull's blue reaction and the compound formed in the Prussian blue reaction are the same unique compound, Prussian blue.[5][6]


  1. ^ Kwong, H.-L. "Potassium Ferricyanide" in Encyclopedia of Reagents for Organic Synthesis (Ed: L. Paquette) 2004, J. Wiley & Sons, New York. DOI: 10.1002/047084289.
  2. ^ Sharpe, A. G., The Chemistry of Cyano Complexes of the Transition Metals, Academic Press: London, 1976
  3. ^ Dunbar, K. R.; Heintz, R. A., "Chemistry of Transition Metal Cyanide Compounds: Modern Perspectives", Progress in Inorganic Chemistry, 1997, volume 45, 283-391.
  4. ^ Carson, Freida L. (1997). Histotechnology: A Self-Instructional Text (2nd ed.), pp. 209-211. Chicago: American Society of Clinical Pathologists. ISBN 0-89189-411-X.
  5. ^ Tafesse, F. (2003). Comparative studies on Prussian blue or diaquatetraamine-cobalt(III) promoted hydrolysis of 4-nitrophenylphosphate in microemulsions. International Journal of Molecular Sciences, 4(6): 362-370.
  6. ^ Verdaguer, M., Galvez, N., Garde, R., & Desplanches, C. (2002). Electrons at work in Prussian blue analogues. Electrochemical Society Interface, 11(3): 28-32.
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Potassium_ferricyanide". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE