My watch list
my.chemeurope.com  
Login  

Antimony trioxide



Antimony trioxide
Other names Antimony(III) oxide
Antimony sesquioxide
Antimonous oxide
Identifiers
CAS number 1309-64-4
Properties
Molecular formula Sb2O3
Molar mass 291.52 g/mol
Appearance white solid
Density 5.2 g/cm³, α-form
Melting point

656 °C

Boiling point

1425 °C

Solubility in water 1.4 mg/100 mL (30 °C)
Structure
Crystal structure cubic (α)<570 °C
orthorhombic (β) >570 °C
Coordination
geometry
pyramidal
Dipole moment zero
Hazards
MSDS External MSDS
EU classification Harmful (Xn)
Carc. Cat. 3
NFPA 704
 
 
4
 
R-phrases R40
S-phrases (S2), S22, S36/37
Related Compounds
Other anions Antimony trisulfide
Other cations Arsenic trioxide
Bismuth trioxide
Related compounds Diantimony tetraoxide
Antimony pentoxide
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
Except where noted otherwise, data are given for
materials in their standard state
(at 25 °C, 100 kPa)

Infobox disclaimer and references

Antimony trioxide is the chemical compound with the formula Sb2O3. It is the most important commercial compound of antimony.

Contents

Preparation

As the primary oxide of antimony, Sb2O3 is prepared by burning elemental antimony in air:

4Sb + 3O2 → 2Sb2O3

Alternatively, antimonide minerals can be roasted to give the same products.

Structure

The structure of Sb2O3 depends on the temperature of the sample. Only at very high temperatures does the molecule Sb2O3 exist. At moderate temperatures, the gas consists of Sb4O6. These molecules are bicyclic cages, similar to the related oxide of phosphorus, phosphorus trioxide. The cage structure is retained in a solid that crystallizes in a cubic habit. The Sb-O distance is 1.977 Å and the O-Sb-O angle of 95.6°.[1] This materials exists in nature as the mineral senarmontite. Below 606 °C, the more stable form of is orthorhombic, consisting of pairs -Sb-O-Sb-O- chains that are linked by oxide bridges between the Sb centers. This form exists in nature as the mineral valentinite.[2]

Antimony trioxide is an amphoteric oxide, dissolving in alkaline solution to give antimonites and in acid solution to given a range of polyantimonous acids. It can be readily oxidized to antimony pentoxide or other antimony(V) compounds, but is also easily reduced to antimony, sometimes with production of stibine.

Uses

The annual consumption of antimony trioxide in the United States is approximately 10,000 tonnes.

  • Flame retardant for textiles, polymers, and coatings
  • Opacifying agent for glasses, ceramics and enamels
  • Pigment antimony white

Toxicology

Antimony trioxide is only weakly absorbed by the digestive system, and the main route of exposure is by inhalation of the dust. The elimination of antimony from the body is slow, leading to a risk of chronic toxicity in the form of pneumoconiosis with repeated inhalation exposures. Acute poisoning is very rare, and the signs are fairly non-characteristic (vomiting, abdominal pain, irritation of the mucous membranes, diarrhea, cardiac irregularities). These symptoms are more often associated with ingestion of other more water soluble compounds.

Chronic poisoning by antimony trioxide is also rare. The main signs are irritation of the respiratory tract and of the skin and a characteristic pneumoconiosis, which is visible on chest X-rays.

Antimony trioxide is known to pass into breast milk and to transverse the placenta only in very small amounts. One study of exposed female workers suggested a higher incidence than usual of menstrual problems and of late-term miscarriages; also their children may have developed slower than usual during the first twelve months of life, although this study is inconclusive. A more recent developmental study in rodents did not confirm an effect on mammalian development.

References

  1. ^ C. Svensson “Refinement of the crystal structure of cubic antimony trioxide, Sb2O3” Acta Crystographica, 1975, volume B31, pp. 2016-2018. doi:10.1107/S0567740875006759.
  2. ^ Wells, A.F. (1984) Structural Inorganic Chemistry, Oxford: Clarendon Press. ISBN 0-19-855370-6.

Further reading

  • Institut national de recherche et de sécurité (INRS), Fiche toxicologique nº 198 : Trioxyde de diantimoine, 1992.
  • Inhalation Developmental Toxicity Studies In Rats With Antimony Trioxide (Sb2O3). Newton PE; Schroeder RE; Zwick L; Serex T; Toxicologist 2004 Mar;78(1-S):38
  • The Oxide Handbook, G.V. Samsonov, 1981, 2nd ed. IFI/Plenum, ISBN 0-306-65177-7
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Antimony_trioxide". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE