Compressive stress

Compressive stress is the stress applied to materials resulting in their compaction (decrease of volume). When a material is subjected to compressive stress, then this material is under compression. Usually, compressive stress applied to bars, columns, etc. leads to shortening.

Additional recommended knowledge

Correct Test Weight Handling Guide: 12 Practical Tips

Guide to balance cleaning: 8 simple steps

Daily Visual Balance Check

Loading a structural element or a specimen will increase the compressive stress until the reach of compressive strength. According to the properties of the material, failure will occur as yield for materials with ductile behaviour (most metals, some soils and plastics) or as rupture for brittle behaviour (geomaterials, cast iron, glass, etc).

In long 'slender' structural elements (such as skeet columns or truss bars), increase of compressive force F leads to structural failure due to buckling at lower stress than the compressive strength.

Compressive stress has stress units (force per unit area), usually with negative values to indicate the compaction. However in geotechnical engineering, compressive stress is represented with positive values.

See also

• Tensile stress
• Hooke's law
• Compression member