My watch list
my.chemeurope.com  
Login  

Mechanical properties of DNA



The mechanical properties of DNA, which are directly related to its structure, are a significant problem for cells. Every process which binds or reads DNA is able to use or modify the mechanical properties of DNA for purposes of recognition, packaging and modification. The extreme length (a chromosome may contain a 10 cm long DNA strand), relative rigidity and helical structure of DNA has led to the evolution of histones and of enzymes such as topoisomerases and helicases to manage a cell's DNA. The properties of DNA are closely related to its molecular structure and sequence, particularly the weakness of the hydrogen bonds and electronic interactions that hold strands of DNA together compared to the strength of the bonds within each strand.

Experimental techniques which can directly measure the mechanical properties of DNA are relatively new, and high-resolution visualization in solution is often difficult. Nevertheless, scientists have uncovered large amount of data on the mechanical properties of this polymer, and the implications of DNA's mechanical properties on cellular processes is a topic of active current research.

It is important to note the DNA found in many cells can be macroscopic in length - a few centimetres long for each human chromosome. Consequently, cells must compact or "package" DNA to carry it within them. In eukaryotes this is carried by spool-like proteins known as histones, around which DNA winds. It is the further compaction of this DNA-protein complex which produces the well known mitotic eukaryotic chromosomes.

Additional recommended knowledge

Contents

Base pair geometry

The geometry of a base pair can be entirely characterised by 6 coordinates: rise, twist, slide, shift, tilt, and roll. These values precisely define the location and orientation in space of each base pair in a DNA molecule relative to its predecessor along the axis of the helix. Together, they characterise the helical structure of the molecule. In regions of a DNA molecule where the normal structure is disrupted these values are used to describe the disruption.

For each base pair, considered relative to its predecessor[1][2][3]:

Shear 
Buckle 
Stretch 
Propeller twist
Rotation of one base with respect to the other in the same base pair.
Stagger 
Opening 
Shift 
displacement along an axis in the base-pair plane perpendicular to the first, directed from the minor to the major groove.
Tilt 
rotation around this axis.
Slide 
displacement along an axis in the plane of the base pair directed from one strand to the other.
Roll 
rotation around this axis.
Rise 
displacement along the helix axis.
Twist 
rotation around the helix axis.
x-displacement 
y-displacement 
inclination 
tip 

Rise and twist determine the handedness and pitch of the helix. The other coordinates, by contrast, can be zero. Slide and shift are typically small in B-DNA, but are substantial in A- and Z-DNA. Roll and tilt make successive base pairs less parallel, and are typically small. A diagram of these coordinates can be found in 3DNA website.

Note that "tilt" has often been used differently in the scientific literature, referring to the deviation of the first, inter-strand base-pair axis from perpendicularity to the helix axis. This corresponds to slide between a succession of base pairs, and in helix-based coordinates is properly termed "inclination".

DNA helix geometries

Three DNA conformations are believed to be found in nature, A-DNA, B-DNA, and Z-DNA. The "B" form described by James D. Watson and Francis Crick is believed to predominate in cells[4]. It is 23.7 Å wide and extends 34 Å per 10 bp of sequence. The double helix makes one complete turn about its axis every 10.4-10.5 base pairs in solution. This frequency of twist (known as the helical pitch) depends largely on stacking forces that each base exerts on its neighbours in the chain.

Other conformations are possible; A-DNA, B-DNA, C-DNA, D-DNA, E-DNA[5], L-DNA, P-DNA[6], S-DNA, and Z-DNA have been described so far.[7] As mentioned above C-DNA, D-DNA, E-DNA, and P-DNA have not been observed in naturally occurring biological systems. Also note the triple-stranded DNA possibility.

A- and Z-DNA

A-DNA and Z-DNA differ significantly in their geometry and dimensions to B-DNA, although still form helical structures. The A form appears likely to occur only in dehydrated samples of DNA, such as those used in crystallographic experiments, and possibly in hybrid pairings of DNA and RNA strands. Segments of DNA that cells have methylated for regulatory purposes may adopt the Z geometry, in which the strands turn about the helical axis the opposite way to A-DNA and B-DNA. There is also evidence of protein-DNA complexes forming Z-DNA structures.    

Structural features of the three major forms of DNA
Geometry attribute A-DNA B-DNA Z-DNA
Helix sense right-handed right-handed left-handed
Repeating unit 1 bp 1 bp 2 bp
Rotation/bp 33.6° 35.9° 60°/2bp
Mean bp/turn 10.7 10.0 12
Inclination of bp to axis +19° -1.2° -9°
Rise/bp along axis 2.3 Å 3.32 Å 3.8 Å
Pitch/turn of helix 24.6 Å 33.2 Å 45.6 Å
Mean propeller twist +18° +16°
Glycosyl angle anti anti C: anti,
G: syn
Sugar pucker C3'-endo C2'-endo C: C2'-endo,
G: C2'-exo
Diameter 25.5 Å 23.7 Å 18.4 Å

Supercoiled DNA

See also: DNA supercoil and Mechanical properties of DNA#DNA topology

The B form of the DNA helix twists 360° per 10.4-10.5 bp in the absence of torsional strain. But many molecular biological processes can induce torsional strain. A DNA segment with excess or insufficient helical twisting is referred to, respectively, as positively or negatively "supercoiled". DNA in vivo is typically negatively supercoiled, which facilitates the unwinding (melting) of the double-helix required for RNA transcription.

Non-helical forms

Other non-double helical forms of DNA have been described, for example side-by-side (SBS) and triple helical configurations. Single stranded DNA may exist 'in statu nascendi' or as thermally induced despiralized DNA.

DNA Bending

DNA is a relatively rigid polymer, typically modelled as a worm-like chain. It has three significant degrees of freedom; bending, twisting and compression, each of which cause particular limitations on what is possible with DNA within a cell. Twisting/torsional stiffness is important for the circularisation of DNA and the orientation of DNA bound proteins relative to each other and bending/axial stiffness is important for DNA wrapping and circularisation and protein interactions. Compression/extension is relatively unimportant in the absence of high tension.

Persistence length/Axial stiffness

Main article: Persistence length
Example sequences and their persistence lengths (B DNA)
Sequence Persistence Length
/base pairs
Random 154±10
(CA)repeat 133±10
(CAG)repeat 124±10
(TATA)repeat 137±10

DNA in solution does not take a rigid structure but is continually changing conformation due to thermal vibration and collisions with water molecules, which makes classical measures of rigidity impossible. Hence, the bending stiffness of DNA is measured by the persistence length, defined as:

"The length of DNA over which the time-averaged orientation of the polymer becomes uncorrelated by a factor of e."

This value may be directly measured using an atomic force microscope to directly image DNA molecules of various lengths. In aqueous solution the average persistence length is 46-50nm or 140-150 base pairs (the diameter of DNA is 2 nm), although can vary significantly. This makes DNA a moderately stiff molecule.

The persistence length of a section of DNA is somewhat dependent on its sequence, and this can cause significant variation. The variation is largely due to base stacking energies and the residues which extend into the minor and major grooves.

Models for DNA bending

Stacking stability of base steps (B DNA)
Step Stacking ΔG
/kcal mol-1
T A -0.19
T G or C A -0.55
C G -0.91
A G or C T -1.06
A A or T T -1.11
A T -1.34
G A or T C -1.43
C C or G G -1.44
A C or G T -1.81
G C -2.17

The entropic flexibility of DNA is remarkably consistent with standard polymer physics models such as the Kratky-Porod worm-like chain model. Consistent with the worm-like chain model is the observation that bending DNA is also described by Hooke's law at very small (sub-piconewton) forces. However for DNA segments less than the persistence length, the bending force is approximately constant and behaviour deviates from the worm-like chain predictions.

This effect results in unusual ease in circularising small DNA molecules and a higher probability of finding highly bent sections of DNA.

Bending preference

DNA molecules often have a preferred direction to bend, ie. anisotropic bending. This is, again, due to the properties of the bases which make up the DNA sequence - a random sequence will have no preferred bend direction, i.e. isotropic bending.

Preferred DNA bend direction is determined by the stability of stacking each base on top of the next. If unstable base stacking steps are always found on one side of the DNA helix then the DNA will preferentially bend away from that direction. As bend angle increases then steric hindrances and ability to roll the residues relative to each other also play a role, especially in the minor groove. A and T residues will be preferentially be found in the minor grooves on the inside of bends. This effect is particularly seen in DNA-protein binding where tight DNA bending is induced, such as in nucleosome particles. See base step distortions above.

DNA molecules with exceptional bending preference can become intrinsically bent. This was first observed in trypanosomatid kinetoplast DNA. Typical sequences which cause this contain stretches of 4-6 T and A residues separated by G and C rich sections which keep the A and T residues in phase with the minor groove on one side of the molecule. For example:

 |                  |                  |                  |                  |                  |
G A T T C C C A A A A A T G T C A A A A A A T A G G C A A A A A A T G C C A A A A A A T C C C A A A C

The intrinsically bent structure is induced by the 'propeller twist' of base pairs relative to each other allowing unusual bifurcated Hydrogen-bonds between base steps. At higher temperatures this structure, and so the intrinsic bend, is lost.

All DNA which bends anisotropically has, on average, a longer persistence length and greater axial stiffness. This increased rigidity is required to prevent random bending which would make the molecule act isotropically.

DNA circularisation

DNA circularisation depends on both the axial (bending) stiffness and torsional (rotational) stiffness of the molecule. For a DNA molecule to successfully circularise it must be long enough to easily bend into the full circle and must have the correct number of bases so the ends are in the correct rotation to allow bonding to occur. The optimum length for circularisation of DNA is around 400 base pairs (1360nm), with an integral number of turns of the DNA helix, i.e. multiples of 10.4 base pairs. Having a non integral number of turns presents a significant energy barrier for circularisation, for example a 10.4 x 30 = 312 base pair molecule will circularise hundreds of times faster than 10.4 x 30.5 ≈ 317 base pair molecule.

DNA stretching

Longer stretches of DNA are entropically elastic under tension. When DNA is in solution, it undergoes continuous structural variations due to the energy available in the solvent. This is due to the thermal vibration of the molecule combined with continual collisions with water molecules. For entropic reasons, more compact relaxed states are thermally accessible than stretched out states, and so DNA molecules are almost universally found in a tangled relaxed layouts. For this reason, a single molecule of DNA will stretch under a force, straightening it out. Using optical tweezers, the entropic stretching behavior of DNA has been studied and analyzed from a polymer physics perspective, and it has been found that DNA behaves largely like the Kratky-Porod worm-like chain model under physiologically accessible energy scales.

Under sufficient tension and positive torque, DNA is thought to undergo a phase transition with the bases splaying outwards and the phosphates moving to the middle. This proposed structure for overstretched DNA has been called "P-form DNA," in honor of Linus Pauling who originally presented it as a possible structure of DNA[6]

The mechanical properties DNA under compression have not been characterized due to experimental difficulties in preventing the polymer from bending under the compressive force.

DNA melting

Melting stability of base steps (B DNA)
Step Melting ΔG
/Kcal mol-1
T A -0.12
T G or C A -0.78
C G -1.44
A G or C T -1.29
A A or T T -1.04
A T -1.27
G A or T C -1.66
C C or G G -1.97
A C or G T -2.04
G C -2.70

DNA melting is the process by which the hydrogen bonds between the strands of the double helix are broken, separating the two strands of DNA. These bonds are weak, easily separated by gentle heating, enzymes or physical force. DNA melting preferentially occurs at certain points in the DNA. T and A rich sequences are more easily melted because T and A are only held together by two hydrogen bonds per base pair, unlike C and G which are held together by three. Particular base steps are also susceptible to DNA melting, particularly T A and T G base steps. These mechanical features are reflected by the use of sequences such as TATAA at the start of many genes to assist RNA polymerase in melting the DNA for transcription.

Strand separation by gentle heating, as used in PCR, is simple providing the molecules have fewer than about 10,000 base pairs (10 kilobase pairs, or 10 kbp). The intertwining of the DNA strands makes long segments difficult to separate. The cell avoids this problem by allowing its DNA-melting enzymes (helicases) to work concurrently with topoisomerases, which can chemically cleave the phosphate backbone of one of the strands so that it can swivel around the other. Helicases unwind the strands to facilitate the advance of sequence-reading enzymes such as DNA polymerase.

DNA topology

Main article: DNA supercoil

  Within the cell most DNA is topologically restricted. DNA is typically found in closed loops (such as plasmids in prokaryotes) which are topologically closed, or as very long molecules whose diffusion coefficients produce effectively topologically closed domains. Linear sections of DNA are also commonly bound to proteins or physical structures (such as membranes) to form closed topological loops.

Francis Crick was one of the first to propose the importance of linking numbers when considering DNA supercoils. In a paper published in 1976, Crick outlined the problem as follows:

In considering supercoils formed by closed double-stranded molecules of DNA certain mathematical concepts, such as the linking number and the twist, are needed. The meaning of these for a closed ribbon is explained and also that of the writhing number of a closed curve. Some simple examples are given, some of which may be relevant to the structure of chromatin.[8]

Analysis of DNA topology uses three values:

L = linking number - the number of times one DNA strand wraps around the other. It is an integer for a closed loop and constant for a closed topological domain.
T = twist - total number of turns in the double stranded DNA helix. This will normally try to be equal to the number turns a DNA molecule will make while free in solution, ie. number of bases/10.4.
W = writhe - number of turns of the double stranded DNA helix around the superhelical axis
L = T + W and ΔL = ΔT + ΔW

Any change of T in a closed topological domain must be balanced by a change in W, and vice versa. This results in higher order structure of DNA. A circular DNA molecule with a writhe of 0 will be circular. If the twist of this molecule is subsequently increased or decreased by supercoiling then the writhe will be appropriately altered, making the molecule undergo plectonemic or toroidal superhelical coiling.

When the ends of a piece of double stranded helical DNA are joined so that it forms a circle the strands are topologically knotted. This means the single strands cannot be separated any process that does not involve breaking a strand (such as heating). The task of un-knotting topologically linked strands of DNA falls to enzymes known as topoisomerases. These enzymes are dedicated to un-knotting circular DNA by cleaving one or both strands so that another double or single stranded segment can pass through. This un-knotting is required for the replication of circular DNA and various types of recombination in linear DNA which have similar topological constraints.

The linking number paradox

For many years, the origin of residual supercoiling in eukaryotic genomes remained unclear. This topological puzzle was referred to by some as the "linking number paradox."[9]. However, when experimentally determined structures of the nucleosome displayed an overtwisted left-handed wrap of DNA around the histone octamer[10][11], this "paradox" was solved. There is considered by most to be no paradox remaining regarding the origin of residual supercoiling in eukaryotic chromosomes.

References

  1. ^ Dickerson RE (1989). "Definitions and nomenclature of nucleic acid structure components". Nucleic Acids Res 17 (5): 1797-1803. PMID 2928107.
  2. ^ Lu XJ, Olson WK (1999). "Resolving the discrepancies among nucleic acid conformational analyses". J Mol Biol 285 (4): 1563-1575. PMID 9917397.
  3. ^ Olson WK, Bansal M, Burley SK, Dickerson RE, Gerstein M, Harvey SC, Heinemann U, Lu XJ, Neidle S, Shakked Z, Sklenar H, Suzuki M, Tung CS, Westhof E, Wolberger C, Berman HM (2001). "A standard reference frame for the description of nucleic acid base-pair geometry". J Mol Biol 313 (1): 229-237. PMID 11601858.
  4. ^ Richmond, et al (2003). "The structure of DNA in the nucleosome core". Nature 423: 145-150. PMID 12736678.
  5. ^ Vargason JM, Eichman BF, Ho PS (2000). "The extended and eccentric E-DNA structure induced by cytosine methylation or bromination". Nature Structural Biology 7: 758-761.
  6. ^ a b Allemand, et al (1998). "Stretched and overwound DNA forms a Pauling-like structure with exposed bases". PNAS 24: 14152-14157. PMID 9826669.
  7. ^ List of 55 fiber structures
  8. ^ Crick FH (1976). "Linking numbers and nucleosomes". Proc Natl Acad Sci USA 73 (8): 2639-43. PMID 1066673.
  9. ^ Prunell A (1998). "A topological approach to nucleosome structure and dynamics: the linking number paradox and other issues". Biophys J 74 (5): 2531-2544. PMID 9591679.
  10. ^ Luger K, Mader AW, Richmond RK, Sargent DF, Richmond TJ, "Crystal Structure of the Nucleosome Core Particle at 2.8 Å Resolution", Nature. 1997 Sep 18; 389 (6648): 251-60.
  11. ^ Davey CA, Sargent DF, Luger K, Maeder AW, Richmond TJ, "Solvent mediated interactions in the structure of the nucleosome core particle at 1.9 Å resolution.", Journal of Molecular Biology. 2002 Jun 21; 319 (5): 1097-1113.
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Mechanical_properties_of_DNA". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE