Your professional cutting mill for small quantities

With an extra-strong rotor for short grinding times and final fineness between 0.25 and 6 mm

final fineness 0.25-6 mm depending on sieve inser ✓ no loss of moisture during sample preparation ✓ allows up to 48,000 cutting processes per minute ✓...

Two grinding principles in one device: impact and cutting mill combined

Active air cooling for temperature-sensitive substances like essential oils

up to 24,000 rpm for fine grinding ✓ active air cooling with separate fan and switchable vacuum ✓ durable high-performance motor with low-wear ceramic groove ball bearing ✓...

FRITSCH Planetary Ball Mills – high-performance all-rounder in routine laboratory work

The right mill for larger sample quantities and high final finenesses

rapid fine comminution of up to 4 samples simultaneously ✓ optimized mill settings via RFID chip in bowl ✓ rapid fine comminution of up to 4 samples simultaneously ✓...

Cutting mill with a throughput of up to 85 l/h for plastics, polymers and biological substances

Variable speed of 50-3,000 rpm and flexible modular system with different rotors enable optimum adaptation to any material. Final fineness up to 0.1 mm with tool-free cleaning....

Fast ultra-fine shredding down to < 1 µm in just 3 minutes

Planetary mill with two grinding stations for efficient sample preparation in analytics, materials research and quality control - speeds up to 800 rpm...

Ultra-fine shredding down to the nano range - in the shortest possible time

The planetary micro-mill achieves finenesses of up to 50 nm at 95 times the acceleration due to gravity and a relative bucket speed of 2,200 rpm. SelfLOCK clamping enables buckets to be changed in seconds without operating errors...

Efficient ultra-fine grinding down to < 1 µm for demanding material analyses

Flexible planetary mill with up to 650 rpm for wet and dry grinding of a wide range of materials - from geology to pharmaceuticals. Six grinding bowl materials and inert gas atmosphere enable contamination-free sample preparation....

High-energy comminution down to less than 1 μm for large sample quantities

Planetary mill with four grinding stations for loss-free fine grinding of hard, medium-hard and soft materials - dry, in suspension or under inert gas....

Automated fine grinding up to 10 μm - reproducible and temperature-friendly

The P-2 mortar grinder combines dry and wet grinding, cryo-grinding and the mixing of ointments and pastes in a single device - with precisely adjustable pestle pressure for reliably reproducible results...

Cross beater mill for pre-shredding and fine shredding with a throughput of up to 80 l/h

Efficient shredding of medium-hard, brittle materials up to Mohs hardness 6 - in batches or continuously with tool-free change of grinding tools...