18-Mar-2009 - University of Helsinki

Paper electrified by copper particles

The Polymer Chemistry Research Group at the University of Helsinki, Finland, has succeeded in producing nano-sized metallic copper particles. When the size of particles is reduced to a nano-scale, the properties of the material undergo substantial changes. Unlike in bulk materials, in nanoparticles the number of surface atoms is considerably greater than the number of atoms inside the material, which, among other things, makes the melting temperature of nanomaterials very low. With suitable heat treatment (sintering), the particles manufactured by the research group can be made to form electricity-conducting layers and patterns on paper.

The research result is interesting in that polymer-protected metal particles can also be used in various electronics applications: various kinds of intelligent patterns can be printed on paper that, in the future, may replace components such as electronics boards.

The purpose of the research was to test the ability of polymeric and small-molecule compounds that contain amine groups to protect copper nanoparticles during their manufacturing stage. The particles were manufactured with either poly(ethylene imine) (PEI) or tetraethylenepentamine (TEPA) used as protecting compounds. The average size of the particles at room temperature was 8.5 nm (with PEI as the protecting agent) or 19.4 nm (with TEPA as the protecting agent). Slightly oxidised at their surface, the particles were sintered to the paper surface, and the electrical conductivity of the layer thus formed was measured. Particles manufactured using PEI released the protective agent during sintering at relatively low temperatures (150-200 °C). At these temperatures, the size of the particles increased rapidly. The electrical conductivity of the sintered particles was good, which makes them promising materials for use in electronics printed on paper.

At the University of Helsinki, a research group led by Professor Heikki Tenhu synthesises the so-called intelligent polymers and studies controlled polymerisation reactions. Polymers are large-molecule compounds that, as functional materials, change their properties according to the changing ambient conditions.

Original article: Petri Pulkkinen et al.; "Poly(ethylene imine) and Tetraethylenepentamine As Protecting Agents for Metallic Copper Nanoparticles"; ACS Appl. Mater. Interfaces 1(2) 519-525, 2009

Facts, background information, dossiers
More about University of Helsinki
  • News

    Gold Recycling

    “Urban mining”, the recycling of precious metals from electronic gadgets, becomes ever more important, although processes that are both efficient and environmentally benign are still scarce. An international team of scientists has now looked deeper into gold dissolution, in particular, how ... more

    Rapid pair production: Detection of a new reaction path in the atmosphere

    Scientists have now observed a particularly rapid type of pair production in the laboratory: Hydrocarbons double when two peroxyl radicals react with each other. This means that stable products with the carbon skeleton of both peroxyl radicals are formed, which very likely will have a perox ... more

    Nanoparticles can grow in cubic shape

    The efficiency of many applications deriving from natural sciences depends dramatically on a finite-size property of nanoparticles, so-called surface-to-volume ratio. The larger the surface of nanoparticles for the same volume is achieved, the more efficiently nanoparticles can interact wit ... more