Currently, you are not logged in to my.chemeurope.com. Therefore, you can remember a maximum of 5 contents.
Distinguish sugars with eye-catching and stretchy rainbow film
Rainbows and sugar may conjure up images of a certain leprechaun-branded breakfast cereal. But now, researchers in ACS Nano report a kaleidoscope-like film for telling different sweeteners apart that displayed multiple colors when stretched by hand. When evenly stretched with a simple apparatus, the material enhanced the unique shifts in fluorescence intensity of 14 sugars tagged with a dye, distinguishing between them in beverages and sweat samples.
Sweet tastes in drinks can come from many types of sugar, including sucrose, fructose and glucose, as well as less common ones, such as maltose. There are also sugars in people’s sweat, which could be tracked to noninvasively monitor blood sugar. It’s hard to tell which molecules are present based on taste or look alone; instead, they’re usually identified with complex methods and sophisticated instruments. To simplify the detection process, Fengyu Li and colleagues previously used photonic crystals — polystyrene nanospheres whose color shifts when sugary compounds are nearby — in a color-changing chip sensor that distinguished 12 different sugars from one another. But these sensors weren’t wearable, so, Li, Chunbao Li and a new team wanted to incorporate photonic crystals into a stretchable easy-to-carry film and see whether the rainbow-colored platform could also detect and differentiate sugars.
The researchers embedded closely packed, ordered rows of polystyrene nanospheres into a film of polyethyl acrylate. Initially, the gummy material looked red, but when it was stretched with a uniform force, its color shifted through the rainbow — red to pink to orange to yellow-green to light green and, finally, dark green at a 40% stretch. And when pulled by hand, the material produced a kaleidoscope of colors, as different parts of the material had different forces on them.
In initial experiments, the researchers showed that stretching the film enhanced the fluorescent signals from 14 sugars that had been attached to dyes. These signals could then be sorted from one another. To see if the sensor could do the same with real-world samples, they mixed six commercially available drinks with the dye alizarin red S-2-diphenylboronic acid 2-aminoethyl ester, creating fluorescent complexes. Solutions with these complexes were dotted onto the film, which was then stretched, and the fluorescence intensities were measured at two different wavelengths of light. And because each samples’ sugar-dye complexes produced unique signals, they could be distinguished from each other. The sensor also differentiated sweat samples from six people. Based on these results, the researchers say that the stretchable, multicolored material could be incorporated into wearable devices for environmental, clinical or health monitoring of sugar, or modified to detect other substances.
The authors acknowledge funding from the National Natural Science Foundation of China.
- 1Turning abandoned mines into batteries
- 2Solar-powered system converts plastic and greenhouse gases into sustainable fuels
- 3From the road to the plate: lettuce takes up toxic additives from tyre wear
- 4New ‘chain mail’ material of interlocking molecules is tough, flexible and easy to make
- 5Spinoff opens new frontier for batteries
- 6Scientists unveil least costly carbon capture system to date
- 7Entire colour palette of inexpensive fluorescent dyes
- 8Turning plastic waste into a valuable soil additive
- 9Toward high-performance solid-state batteries
- 10Using machine learning to improve the toxicity assessment of chemicals
- Superconductivity switches on and off in “magic-angle” graphene
- Scientists unveil least costly carbon capture system to date
- Startup M2X Energy partners with UCF to convert greenhouse gases into low-carbon methanol
- Farewell to ‘forever’ – Destroying PFAS by grinding it up with a new additive
- Xylem To Acquire Evoqua