Oddball edge wins nanotube faceoff
When is a circle less stable than a jagged loop? Apparently when you're talking about carbon nanotubes.
Illustration by Evgeni Penev/Rice University
Rice University theoretical researchers have discovered that nanotubes with segregated sections of "zigzag" and "armchair" facets growing from a solid catalyst are far more energetically stable than a circular arrangement would be.
Under the right circumstances, they reported, the interface between a growing nanotube and its catalyst can reach its lowest-known energy state via the two-faced "Janus" configuration, with a half-circle of zigzags opposite six armchairs.
The terms refer to the shape of the nanotube's edge: A zigzag nanotube's end looks like a saw tooth, while an armchair is like a row of seats with armrests. They are the basic edge configurations of the two-dimensional honeycomb of carbon atoms known as graphene (as well as other 2D materials) and determine many of the materials' properties, especially electrical conductivity.
The Brown School of Engineering team of materials theorist Boris Yakobson, researcher and lead author Ksenia Bets and assistant research professor Evgeni Penev reported their results in the American Chemical Society journal ACS Nano.
The theory is a continuation of the team's discovery last year that Janus interfaces are likely to form on a catalyst of tungsten and cobalt, leading to a single chirality, called (12,6), that other labs had reported growing in 2014.
The Rice team now shows such structures aren't unique to a specific catalyst, but are a general characteristic of a number of rigid catalysts. That's because the atoms attaching themselves to the nanotube edge always seek their lowest energy states, and happen to find it in the Janus configuration they named AZ.
"People have assumed in studies that the geometry of the edge is a circle," Penev said. "That's intuitive -- it's normal to assume that the shortest edge is the best. But we found for chiral tubes the slightly elongated Janus edge allows it to be in much better contact with solid catalysts. The energy for this edge can be quite low."
In the circle configuration, the flat armchair bottoms rest on the substrate, providing the maximum number of contacts between the catalyst and the nanotube, which grows straight up. (Janus edges force them to grow at an angle.)
Carbon nanotubes -- long, rolled-up tubes of graphene -- are difficult enough to see with an electron microscope. As yet there's no way to observe the base of a nanotube as it grows from the bottom up in a chemical vapor deposition furnace. But theoretical calculations of the atom-level energy that passes between the catalyst and the nanotube at the interface can tell researchers a lot about how they grow.
That's a path the Rice lab has pursued for more than a decade, pulling at the thread that reveals how minute adjustments in nanotube growth can change the kinetics, and ultimately how nanotubes can be used in applications.
"Generally, the insertion of new atoms at the nanotube edge requires breaking the interface between the nanotube and the substrate," Bets said. "If the interface is tight, it would cost too much energy. That is why the screw dislocation growth theory proposed by Professor Yakobson in 2009 was able to connect the growth rate with the presence of kinks, the sites on the nanotube edge that disrupt the tight carbon nanotube-substrate contact.
"Curiously, even though Janus edge configuration allows very tight contact with the substrate it still preserves a single kink that would allow continuous nanotube growth, as we demonstrated last year for the cobalt tungsten catalyst," Bets said.
Bets ran extensive computer simulations to model nanotubes growing on three rigid catalysts that showed evidence of Janus growth and one more "fluid" catalyst, tungsten carbide, that did not. "The surface of that catalyst is very mobile, so the atoms can move a lot," Penev said. "For that one, we did not observe a clear segregation."
Yakobson compared Janus nanotubes to the Wulff shape of crystals. "It's somewhat surprising that our analysis suggests a restructured, faceted edge is energetically favored for chiral tubes," he said. "Assuming that the lowest energy edge must be a minimal-length circle is like assuming that a crystal shape must be a minimal-surface sphere but we know well that 3D shapes have facets and 2D shapes are polygons, as epitomized by the Wulff construction.
"Graphene has by necessity several 'sides,' but a nanotube cylinder has one rim, making the energy analysis different," he said. "This raises fundamentally interesting and practically important questions about the relevant structure of the nanotube edges."
The Rice researchers hope their discovery will advance them along the path toward those answers. "The immediate implication of this finding is a paradigm shift in our understanding of growth mechanisms," Yakobson said. "That may become important in how one practically designs the catalyst for efficient growth, especially of controlled nanotube symmetry type, for electronic and optical utility.
Other news from the department science
Blue-green algae sugar instead of glyphosate
Cooperation project develops environmentally friendly glyphosate alternative
Using clay to combat eternal toxins
TU Freiberg clarifies basis for innovative PFAS filter made of clay
Unveiling a new era of imaging: Boston University engineers lead breakthrough microscopy techniques
Researchers made significant advancements in the field of vibrational imaging
Phasing out fossil fuels could save millions of lives
The mortality burden attributable to air pollution from fossil fuel use is considerably higher than most previous estimates - a phaseout of fossil fuels would have tremendous, positive health outcomes
Replicating the structure of bird feathers
The new material could be used in batteries or filtration
Quantum tool opens door to uncharted phenomena
Method can contribute to a better understanding of quantum materials
Recovering instead of shredding: recycling batteries more efficiently
KIT researchers are working with industry to develop a more sustainable recycling process to recycle materials from lithium-ion batteries more effectively
Industry 4.0: No impact on energy consumption?
To what extent does the digitalisation of industrial and manufacturing processes (Industry 4.0) improve energy efficiency and thus reduce energy intensity?
New approach to the sensible utilisation of carbon dioxide from car exhaust gases
"A method has been discovered that uses impure CO2 streams and enables a breakthrough in the synthesis of valuable chemicals and pharmaceuticals"
Boosting PET recycling with higher standards for laboratory experiments
New study shows how enzymatic plastic degradation could be brought one step closer to commercialisation
Innovating Optoelectronic Components with Phosphorus
Significant breakthrough: phosphorus chemists develop new method to selectively introduce phosphorus and nitrogen atoms into polyaromatic systems
Artificial intelligence finds ways to develop new drugs
The chemists tested the process using borylation – a reaction that activates hydrocarbon scaffolds
X-rays reveal how glasses lose their stability
PETRA III experiment shows how atoms in glass behave as weaknesses appear
Most read news
Plastic-eating bacteria turn waste into useful starting materials for other products
Microbial Upcycling of Waste PET
Microbes could help reduce the need for chemical fertilizers
A coating protects nitrogen-fixing bacteria: Start-up to commercialise coated bacteria for large-scale use in regenerative agriculture
New designs for solid-state electrolytes may soon revolutionize the battery industry
Scientists achieve monumental improvements in lithium-metal-chloride solid-state electrolytes
Dow and Evonik announce startup of hydrogen peroxide to propylene glycol (HPPG) pilot plant
Innovative technology offer flexibility, lower costs, and a smaller environmental footprint
Inauguration of the world’s first pilot plant for the cost-efficient production of green methanol
Start-up C1 Green Chemicals AG and research partners develop fundamentally new production process
This is a battery
Two colored liquids bubbling through tubes: Is this what the battery of the future looks like?
Converting PFAS “forever chemicals” into valuable compounds
Scientists develop a new method to incorporate harmful perfluoroalkenes into N-heterocyclic carbene ligands
Not so silver lining: Microplastics found in clouds could affect the weather
Low-altitude and denser clouds contained greater amounts of microplastics
Graphene's proton permeability: A switch for future energy technologies
This discovery could lead to the development of more efficient hydrogen fuel cells and solar water-splitting devices
Lithium-ion batteries are no longer the gold standard in battery tech
On the way to safer and more powerful energy sources
CO2-free hydrogen: BASF receives funding approval for 54-megawatt water electrolysis plant
Proton exchange membrane (PEM) electrolyzer expected to produce up to 8,000 metric tons of hydrogen per year
More news from our other portals
Bowel cancer: aspirin activates protective genes
Researchers have identified a signaling pathway by which aspirin can inhibit colorectal cancer.
Dunning-Kruger effect with muesli bars
Those who know the least consider themselves highly competent
Autonomous measuring instruments systematically detect new materials
A new algorithm measures materials libraries up to four times faster than before: It’s based on machine learning
New drug delivery system could reduce daily diabetes shots to just three a year
Dietary management drugs have transformed Type 2 diabetes care, but daily injection routines are challenging for some patients
Naked Clams: The New Superfood Sensation Emerging from the Depths
Researchers found Naked Clams contain almost twice the amount of Vitamin B12 as blue mussels and have developed an efficient way to farm them
Researchers discover new ultra strong material for microchip sensors
A material that doesn't just rival the strength of diamonds and graphene, but boasts a yield strength 10 times greater than Kevlar
Pushers, overcrowded trains and phone zombies
Sprite presents the world's first vending machine that responds to the things that bother Generation Z the most
Aston University technology to combat the not-so sweet practice of honey fraud
Light technology to be used to detect if honey is blended with cheap additions
How stem cells and immune cells communicate
Lisec Artz Award for Simon Haas: Groundbreaking discovery of an unknown protective mechanism against blood cancer from stem cells
Scientists use quantum biology, AI to sharpen genome editing tool
"This study represents an exciting advancement toward, understanding how we can avoid making costly ‘typos’ in an organism’s genetic code"
From the trough to the plate - digitally calculated
Computer program "ConTrans" estimates how much of an undesirable substance is transferred from animal feed to food
Viral Impostors: Breakthrough for Virus Research
The penetration of viruses into cells can now be tracked with unprecedented accuracy thanks to innovative design for pseudoviruses
Fatty acid factory filmed at work
High-resolution images provide new insights into cellular fatty acid production: Potential for medicine and biotechnology
Textbook knowledge turned on its head: 3-in-1 microorganism discovered
Newly multifunctional bacterial species
Tönnies Group launches first nationwide "Meat Climate Platform"
100 guests at the Future Forum for Agriculture
Tracking down Environmental Toxins
Detection of per- and polyfluoroalkyl substances (PFAS) by interrupted energy transfer
Could eating turkey ease colitis?
According to data in mice, extra tryptophan could reduce the risk of future colitis flares
The weight of pollution: exposure linked to obesity
Chronic exposure to environmental pollutants found to increase risk of cardiovascular disease
Are healthy foods automatically sustainable, too?
Perceptions about sustainability and healthy food choices are closely linked
© 1997-2023 LUMITOS AG, All rights reserved