10-May-2022 - Deutsches Elektronen-Synchrotron DESY

Scientists solve mystery about catalysis for green production of methanol from carbon dioxide

Live view into methanol synthesis

An international research team led by researchers of Stockholm University has for the first time been able to study the surface of a copper-zinc catalyst when carbon dioxide is reduced to methanol. The results – obtained at DESY´s brilliant light source PETRA III – are published in the scientific journal Science. A better knowledge of the catalytic process of methanol synthesis and the possibility of finding even more efficient materials opens the door for a green transition in the chemical industry.

Methanol – the simplest alcohol – is currently one of the most important petrochemical basic chemicals, with an annual production of 110 million tones. It can be converted into tens of thousands of different products and used for the manufacture of, for example, plastics, detergents, pharmaceuticals and fuels. Methanol also has the potential to become a future energy carrier where, for example, aviation fuel can be produced using captured carbon dioxide and hydrogen from electrolysis of water instead of using natural gas. A future green transformation of the chemical industry, similar to the one with green steel, where wind or solar energy drives electrolytic cells is therefore a possibility.

The industrial production of methanol takes place in a catalytic process where a mixture of carbon monoxide (CO), carbon dioxide (CO2) and hydrogen (H2) reacts to methanol (CH3OH). The catalyst consists of a mixture of copper, zinc oxide and aluminium oxide. However, the underlying function and the chemical state of the catalyst constituents during the reaction has never been solved – till now. “The challenge has been to experimentally investigate the catalyst surface with surface-sensitive methods under real reaction conditions at relatively high pressures and temperatures. Those conditions have for many years not been achievable and different hypotheses about zinc being available as oxide, metallic or in alloy with copper arose but could not be unambiguously verified”, says Anders Nilsson, professor of Chemical Physics at Stockholm University.

“It is fantastic that we have been able to shed light into this complex topic of methanol formation over copper-zinc catalyst after many years of effort.” says Peter Amann, first author of the publication.

The studies have been performed at PETRA III beamline P22, dedicated to study the electronic and atomic structure of surfaces, interfaces, and bulk materials via photoelectron spectroscopy. “What is special is that we have built a photoelectron spectroscopy instrument in Stockholm that allows studies of catalyst surfaces under high pressures and thereby directly been able to observe what happens when the reaction takes place,”, says David Degerman, PhD student in Chemical Physics at Stockholm University. “We have opened a new door into catalysis with our new instrument”.

“The combination of the PETRA III beam parameters with the the innovative spectroscopy instrument allows in-operando experiments of catalysts at pressures ten times higher than at other synchrotron light sources”, says DESY´s Christoph Schlueter, beamline scientist at P22.

“We have succeeded using our instrument to demonstrate that zinc is alloyed with copper right at the surface and this provides special atomic sites where methanol is created from carbon dioxide”, says Chris Goodwin, researcher in Chemical Physics at Stockholm University. “During industrial processes, a small amount of carbon monoxide is mixed in, which prevents the formation of zinc oxide from carbon dioxide”.

“To have our Stockholm instrument at one of the brightest x-ray sources in the world at PETRA III at DESY in Hamburg has been crucial to conduct the study”,says Patrick Lömker,Postdoc at Stockholm University. “We can now imagine the future with even brighter sources when the machine upgrades to PETRA IV”.

In the study the researchers were able to determine different behaviours of the catalyst´s surface depending on the fraction of CO and CO2 in the gas mixture – a starting point to optimize existing of even find new better catalysts. “We now have the tools to conduct research leading to possible other catalyst materials that can be used better to fit together with electrolysis-produced hydrogen for the green transition of the chemical industry, which today is completely fossil-based and accounts for 8% of the world-wide carbon dioxide emissions”, says Anders Nilsson.

The study was conducted by a collaboration of University of Stockholm with the University of Innsbruck and Vienna Technical University, DESY and the Fritz-Haber Institute in Berlin.

Facts, background information, dossiers
More about Deutsches Elektronen-Synchrotron DESY
  • News

    PETRA III shines a light on efficient production technique for a novel ‘green’ fertiliser

    A purely mechanical method can produce a novel, more sustainable fertiliser in a less polluting way. That is the result of a method optimised at DESY's light source PETRA III. An international team used PETRA III to optimise the production method that is an adaptation of an ancient techniqu ... more

    Molecule snapshot by explosion

    Exploding a photo subject in order to take its picture? An international research team at the world's largest X-ray laser, the European XFEL, used this “extreme” method to take pictures of complex molecules. With the ultra-bright X-ray flashes generated by the facility, the scientists were ... more

    Cosmic chemistry in the lab

    Using DESY's free-electron laser FLASH, scientists have recreated some of the harsh environment of interstellar space in the lab and analysed the reaction of astrochemical molecules to these conditions. The results show a comprehensive picture of the dynamics of polycyclic aromatic hydrocar ... more

More about Stockholm University