New Quantum Dot Microscope Shows Electric Potentials of Individual Atoms
Copyright: Forschungszentrum Jülich / Sascha Kreklau
Copyright: Forschungszentrum Jülich / Christian Wagner
The positive atomic nuclei and negative electrons of which all matter consists produce electric potential fields that superpose and compensate each other, even over very short distances. Conventional methods do not permit quantitative measurements of these small-area fields, which are responsible for many material properties and functions on the nanoscale. Almost all established methods capable of imaging such potentials are based on the measurement of forces that are caused by electric charges. Yet these forces are difficult to distinguish from other forces that occur on the nanoscale, which prevents quantitative measurements.
Four years ago, however, scientists from Forschungszentrum Jülich discovered a method based on a completely different principle. Scanning quantum dot microscopy involves attaching a single organic molecule – the “quantum dot” – to the tip of an atomic force microscope. This molecule then serves as a probe. “The molecule is so small that we can attach individual electrons from the tip of the atomic force microscope to the molecule in a controlled manner,” explains Dr. Christian Wagner, head of the Controlled Mechanical Manipulation of Molecules group at Jülich’s Peter Grünberg Institute (PGI-3).
The researchers immediately recognized how promising the method was and filed a patent application. However, practical application was still a long way off. “Initially, it was simply a surprising effect that was limited in its applicability. That has all changed now. Not only can we visualize the electric fields of individual atoms and molecules, we can also quantify them precisely,” explains Wagner. “This was confirmed by a comparison with theoretical calculations conducted by our collaborators from Luxembourg. In addition, we can image large areas of a sample and thus show a variety of nanostructures at once. And we only need one hour for a detailed image.”
The Jülich researchers spent years investigating the method and finally developed a coherent theory. The reason for the very sharp images is an effect that permits the microscope tip to remain at a relatively large distance from the sample, roughly 2–3 nanometres – unimaginable for a normal atomic force microscope.
In this context, it is important to know that all elements of a sample generate electric fields that influences the quantum dot and can therefore be measured. The microscope tip acts as a protective shield that dampens the disruptive fields from areas of the sample that are further away. “The influence of the shielded electric fields thus decreases exponentially, and the quantum dot only detects the immediate surrounding area,” explains Wagner. “Our resolution is thus much sharper than could be expected from even an ideal point probe.”
The Jülich researchers owe the speed at which the complete sample surface can be measured to their partners from Otto von Guericke University Magdeburg. Engineers there developed a controller that helped to automate the complex, repeated sequence of scanning the sample. “An atomic force microscope works a bit like a record player,” says Wagner. “The tip moves across the sample and pieces together a complete image of the surface. In previous scanning quantum dot microscopy work, however, we had to move to an individual site on the sample, measure a spectrum, move to the next site, measure another spectrum, and so on, in order to combine these measurements into a single image. With the Magdeburg engineers’ controller, we can now simply scan the whole surface, just like using a normal atomic force microscope. While it used to take us 5–6 hours for a single molecule, we can now image sample areas with hundreds of molecules in just one hour.”
There are some disadvantages as well, however. Preparing the measurements takes a lot of time and effort. The molecule serving as the quantum dot for the measurement has to be attached to the tip beforehand – and this is only possible in a vacuum at low temperatures. In contrast, normal atomic force microscopes also work at room temperature, with no need for a vacuum or complicated preparations.
And yet, Prof. Stefan Tautz, director at PGI-3, is optimistic: “This does not have to limit our options. Our method is still new, and we are excited for the first projects so we can show what it can really do.”
There are many fields of application for quantum dot microscopy. Semiconductor electronics is pushing scale boundaries in areas where a single atom can make a difference for functionality. Electrostatic interaction also plays an important role in other functional materials, such as catalysts. The characterization of biomolecules is another avenue. Thanks to the comparatively large distance between the tip and the sample, the method is also suitable for rough surfaces – such as the surface of DNA molecules, with their characteristic 3D structure.
Other news from the department science
Argonne and Idaho National Laboratories partner with CMBlu Energy for innovative long-duration energy storage project
The project aims to improve microgrids in cold climates and make fast charging of electric vehicles more affordable in underserved communities
Blue-green algae sugar instead of glyphosate
Cooperation project develops environmentally friendly glyphosate alternative
Using clay to combat eternal toxins
TU Freiberg clarifies basis for innovative PFAS filter made of clay
Unveiling a new era of imaging: Boston University engineers lead breakthrough microscopy techniques
Researchers made significant advancements in the field of vibrational imaging
Phasing out fossil fuels could save millions of lives
The mortality burden attributable to air pollution from fossil fuel use is considerably higher than most previous estimates - a phaseout of fossil fuels would have tremendous, positive health outcomes
Replicating the structure of bird feathers
The new material could be used in batteries or filtration
Quantum tool opens door to uncharted phenomena
Method can contribute to a better understanding of quantum materials
Recovering instead of shredding: recycling batteries more efficiently
KIT researchers are working with industry to develop a more sustainable recycling process to recycle materials from lithium-ion batteries more effectively
Industry 4.0: No impact on energy consumption?
To what extent does the digitalisation of industrial and manufacturing processes (Industry 4.0) improve energy efficiency and thus reduce energy intensity?
New approach to the sensible utilisation of carbon dioxide from car exhaust gases
"A method has been discovered that uses impure CO2 streams and enables a breakthrough in the synthesis of valuable chemicals and pharmaceuticals"
Boosting PET recycling with higher standards for laboratory experiments
New study shows how enzymatic plastic degradation could be brought one step closer to commercialisation
Innovating Optoelectronic Components with Phosphorus
Significant breakthrough: phosphorus chemists develop new method to selectively introduce phosphorus and nitrogen atoms into polyaromatic systems
Artificial intelligence finds ways to develop new drugs
The chemists tested the process using borylation – a reaction that activates hydrocarbon scaffolds
Most read news
Plastic-eating bacteria turn waste into useful starting materials for other products
Microbial Upcycling of Waste PET
Microbes could help reduce the need for chemical fertilizers
A coating protects nitrogen-fixing bacteria: Start-up to commercialise coated bacteria for large-scale use in regenerative agriculture
New designs for solid-state electrolytes may soon revolutionize the battery industry
Scientists achieve monumental improvements in lithium-metal-chloride solid-state electrolytes
Inauguration of the world’s first pilot plant for the cost-efficient production of green methanol
Start-up C1 Green Chemicals AG and research partners develop fundamentally new production process
Dow and Evonik announce startup of hydrogen peroxide to propylene glycol (HPPG) pilot plant
Innovative technology offer flexibility, lower costs, and a smaller environmental footprint
This is a battery
Two colored liquids bubbling through tubes: Is this what the battery of the future looks like?
Converting PFAS “forever chemicals” into valuable compounds
Scientists develop a new method to incorporate harmful perfluoroalkenes into N-heterocyclic carbene ligands
Not so silver lining: Microplastics found in clouds could affect the weather
Low-altitude and denser clouds contained greater amounts of microplastics
Graphene's proton permeability: A switch for future energy technologies
This discovery could lead to the development of more efficient hydrogen fuel cells and solar water-splitting devices
Lithium-ion batteries are no longer the gold standard in battery tech
On the way to safer and more powerful energy sources
CO2-free hydrogen: BASF receives funding approval for 54-megawatt water electrolysis plant
Proton exchange membrane (PEM) electrolyzer expected to produce up to 8,000 metric tons of hydrogen per year
More news from our other portals
Bowel cancer: aspirin activates protective genes
Researchers have identified a signaling pathway by which aspirin can inhibit colorectal cancer.
Dunning-Kruger effect with muesli bars
Those who know the least consider themselves highly competent
Autonomous measuring instruments systematically detect new materials
A new algorithm measures materials libraries up to four times faster than before: It’s based on machine learning
New drug delivery system could reduce daily diabetes shots to just three a year
Dietary management drugs have transformed Type 2 diabetes care, but daily injection routines are challenging for some patients
Naked Clams: The New Superfood Sensation Emerging from the Depths
Researchers found Naked Clams contain almost twice the amount of Vitamin B12 as blue mussels and have developed an efficient way to farm them
Researchers discover new ultra strong material for microchip sensors
A material that doesn't just rival the strength of diamonds and graphene, but boasts a yield strength 10 times greater than Kevlar
Aston University technology to combat the not-so sweet practice of honey fraud
Light technology to be used to detect if honey is blended with cheap additions
How stem cells and immune cells communicate
Lisec Artz Award for Simon Haas: Groundbreaking discovery of an unknown protective mechanism against blood cancer from stem cells
Pushers, overcrowded trains and phone zombies
Sprite presents the world's first vending machine that responds to the things that bother Generation Z the most
Scientists use quantum biology, AI to sharpen genome editing tool
"This study represents an exciting advancement toward, understanding how we can avoid making costly ‘typos’ in an organism’s genetic code"
Tönnies Group launches first nationwide "Meat Climate Platform"
100 guests at the Future Forum for Agriculture
Viral Impostors: Breakthrough for Virus Research
The penetration of viruses into cells can now be tracked with unprecedented accuracy thanks to innovative design for pseudoviruses
From the trough to the plate - digitally calculated
Computer program "ConTrans" estimates how much of an undesirable substance is transferred from animal feed to food
Fatty acid factory filmed at work
High-resolution images provide new insights into cellular fatty acid production: Potential for medicine and biotechnology
Tracking down Environmental Toxins
Detection of per- and polyfluoroalkyl substances (PFAS) by interrupted energy transfer
Textbook knowledge turned on its head: 3-in-1 microorganism discovered
Newly multifunctional bacterial species
Are healthy foods automatically sustainable, too?
Perceptions about sustainability and healthy food choices are closely linked
The weight of pollution: exposure linked to obesity
Chronic exposure to environmental pollutants found to increase risk of cardiovascular disease
Could eating turkey ease colitis?
According to data in mice, extra tryptophan could reduce the risk of future colitis flares