A crack in the mystery of 'oobleck' -- friction thickens fluids

10-May-2016 - USA

By revealing missing details behind the odd behavior of a science fair favorite -- a soupy mixture known as "oobleck" that switches back and forth between liquid and solid -- scientists from the National Institute of Standards and Technology (NIST) and Georgetown University could help to end a long-running scientific debate and improve processes ranging from pouring concrete to making better body armor.

New research by NIST and Georgetown scientists deciphers the mechanisms that cause the materials to switch between liquid and solid in response to stress.

Oobleck's name is borrowed from a Dr. Seuss classic (Bartholomew and the Oobleck). Squeeze or pound it and, in an instant, the slurry of cornstarch and water becomes solid, only to revert to ooze once the stress is relieved.

The NIST and Georgetown scientists have developed a new picture to describe oobleck and similar mixtures of fine particles suspended in liquids. Based on flow measurements of tiny silica beads dispersed in solution, the model invokes two competing theories to explain the phenomenon of "shear-thickening" fluids, which stiffen in response to stress.

Known more formally as non-Newtonian substances, shear-thickening fluids are more than just curiosities.

"They dictate how much stuff you can move and at what speed," said Daniel Blair, a Georgetown University physics professor and co-author of an article published in Physical Review Letters. "In the chemical processing industry, you're looking for the most efficient way to move something through a pipe, without breaking a pump. To do that, you want to know as much as you can about shear thickening so you can control it."

Opposing theories--one drawing mostly on experimental evidence, the other on results of modeling studies--have been proposed to explain shear thickening in suspensions of microscopic particles, also called colloids. Rather than competing, it turns out that the two are complementary, according to the new research.

"The ongoing debate concerns the role of lubrication-based hydrodynamic interactions versus frictional contact forces," explained lead author John Royer, a NIST materials scientist.

At low concentrations of silica beads, Royer, Blair and NIST materials scientist Steven Hudson found that measurements of stress were consistent with the hydrodynamic model. The model posits that impact forces particles to pack into assemblies called hydroclusters. As stress increases, the hydroclusters contract and the fluid thickens, or becomes more viscous. Liquid is squeezed out of the clusters, creating an ever-thinner lubricating layer separating the particles and making the scattered clusters more rigid.

But as in earlier experiments, Royer says, the amount of shear thickening observed exceeded the levels that models indicated could be achieved with hydroclusters.

A competing model invokes frictional contacts -- essentially, particle collisions caused by stress--as the primary driver of thickening. But, the friction model requires materials to expand -- or dilate -- once stress surpasses a threshold and particles lock into place so that they are unable to squeeze by each other, as in the hydrodynamic model.

Therein lies the rub. Experiments to date have not yielded evidence of stress-caused expansion, leading some scientists to rule out friction as playing a significant role in shear thickening.

Royer and colleagues tackled these quandaries by measuring how colloids with different concentrations of bacterium-sized spheres responded to stresses ranging from slight to large. These measurements, done on a state-of-the-art rheometer, or flow-measurement device, at Georgetown's Institute for Soft Matter Synthesis and Metrology, unmasked "a previously hidden transition from hydrodynamics-dominated to friction-dominated interactions as the shear thickening becomes more pronounced," Royer says.

They found a transition from contraction to expansion, which occurs without fanfare--or no observable change in shear-thickening behavior itself.

"This transition demonstrates that shear thickening is driven primarily by frictional contacts, with hydrodynamic forces playing a supporting role at lower concentrations of particles, when mixtures are less dense," Royer explained.

"These results now motivate new microscopic approaches to control shear thickening in industrial applications, by either minimizing thickening when steady flow is needed or controlling thickening for use as in flexible body armor applications."

###

Protective clothing applications under development aim to exploit shear thickening to, for example, strengthen defense against knife wounds in the case of ballistic armor and to further enhance protection against penetration by projectiles and blast debris.

Paper: J.R. Royer, D.L. Blair and S.D. Hudson. A rheological signature of frictional interactions in shear thickening suspensions. Physical Review Letters. May 5, 2016.

Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.

Share --> Print E-Mail

Media Contact

Mark Bello
mark.bello@nist.gov
301-975-3776

@usnistgov

http://www. nist. gov

More on this News Release A crack in the mystery of 'oobleck' -- friction thickens fluids

National Institute of Standards and Technology (NIST)

Journal Physical Review Letters Keywords CHEMISTRY/PHYSICS/MATERIALS SCIENCES MATERIALS POLYMER CHEMISTRY Original Source http://www. nist. gov/ mml/ msed/ a-crack-in-the-mystery-of-oobleck-friction-thickens-fluids. cfm Related Journal Article http://dx. doi. org/ 10. 1103/ PhysRevLett. 116. 188301 More in Chemistry & Physics Physics: From the atomic to the nuclear clock Ludwig-Maximilians-Universität München A crack in the mystery of 'oobleck' -- friction thickens fluids National Institute of Standards and Technology (NIST) The cause of high Tc superconductivity at the interface between FeSe and SrTiO3 Science China Press Speedy ion conduction in solid electrolytes clears road for advanced energy devices DOE/Oak Ridge National Laboratory View all Chemistry & Physics news Trending Science News Antibody therapy opens door to potential new treatment for HIV Rockefeller University TGen-ASU researchers find tiny genetic switches in lizard tail regeneration The Translational Genomics Research Institute In scientific first, researchers visualize proteins being born Albert Einstein College of Medicine Achieving fish biomass targets: The key to securing a sustainable future for coral reefs Wildlife Conservation Society View all latest news

Copyright © 2016 by the American Association for the Advancement of Science (AAAS)

Breaking News RSS Feed All EurekAlert! RSS Feeds @EurekAlertAAAS facebook.com/EurekAlert Help / FAQ Disclaimer Privacy Policy Terms & Conditions Contact EurekAlert!

Copyright © 2016 by the American Association for the Advancement of Science (AAAS)

Original publication

Other news from the department science

Most read news

More news from our other portals

Discover the latest developments in battery technology!

See the theme worlds for related content

Topic world Rheology

Rheology deals with the flow behavior and deformation properties of materials. In the chemical field, it is indispensable for understanding the consistency, viscosity and elasticity of liquids, gels and solids. Whether formulating paints, producing polymers or optimizing food textures, rheological properties influence how substances react, move and feel.

3 products
4 whitepaper
3 brochures
View topic world

Topic world Rheology

Rheology deals with the flow behavior and deformation properties of materials. In the chemical field, it is indispensable for understanding the consistency, viscosity and elasticity of liquids, gels and solids. Whether formulating paints, producing polymers or optimizing food textures, rheological properties influence how substances react, move and feel.

3 products
4 whitepaper
3 brochures